FAQ

Structural engineer questions, answered

Short, direct answers on prices, South Australian approvals, site visits, reports, commercial work and the limits of what an engineer can tell you. Most answers link to the service or guide that covers the topic in depth.

In short

These are the questions Adelaide homeowners, buyers, builders and businesses ask us most. Our fees start at $350 + GST ($385 inc GST), every quote is fixed and arrives in under 20 minutes on average, during business hours, and we visit sites across Greater Adelaide and the Adelaide Hills. We design and certify, but we never sell or carry out repairs.

Fees from
$350 + GST
Quote time
Under 20 min on average
Site visits
Greater Adelaide and the Hills
Desktop work
SA-wide
Independence
Engineering only, no repairs

FAQ

Prices and quotes: common questions

What our work costs, how fixed quotes work and how quickly you'll have one. See all prices

How much does a structural engineer cost in Adelaide?

From $350 + GST ($385 inc GST) for a desktop review of photos or plans, $550 + GST for a site inspection with a letter of advice and $990 + GST ($1,089 inc GST) for a structural inspection and full report. Granny flats, extensions, defect reports, heritage homes and commercial work are priced by fixed quote. See all prices.

Is the quote a fixed price?

Yes. Your quote states a fixed fee for the scope it describes, what's included and whether a site visit is needed. Anything outside that scope is quoted separately before we start it.

How quickly will I get a quote?

In under 20 minutes on average, during business hours (Mon–Fri 8:00am–5:00pm). Photos or plans are usually enough to price the job; see how it works.

Are your prices ex GST?

Yes. Prices on this site are shown ex GST with the inc GST figure beside them, for example $990 + GST ($1,089 inc GST). Your quote shows both.

FAQ

Engineers and certifiers: common questions

How engineers are recognised in South Australia and how an engineer differs from a certifier. Checking an engineer's work

Does South Australia register structural engineers?

No. South Australia does not currently register engineers, and its planned scheme was paused (Engineers Australia, April 2026). Our structural design follows the National Construction Code and Australian Standards.

Is a structural engineer the same as a building certifier?

No. The council or an accredited professional (a building certifier) assesses your plans and grants Building Rules Consent. A structural engineer designs the structure, prepares the calculations and supplies the certificates or reports the consent asks for.

FAQ

Approvals and paperwork: common questions

Planning Consent, Building Rules Consent, exempt work, the Statement of Compliance and neighbour excavation. Read: building approvals in SA

Does my building work need approval in SA?

Most structural work needs Development Approval: Planning Consent where the Planning and Design Code requires it, plus Building Rules Consent, applied for on PlanSA. Some minor work is exempt when it meets set conditions, such as a retaining wall holding back no more than 1 m of ground away from the coast, flood overlays and heritage places. Read building approvals in SA.

Does removing a load-bearing wall need approval?

Yes. Removing a load-bearing wall falls outside the exemption for internal alterations, so it needs approval. We design the beam, posts and footings from $790 + GST; see wall removal.

Who signs the Statement of Compliance?

The builder (the licensed building work contractor) signs Part A and the owner signs Part B, at completion. We supply any engineer's certificates or reports your consent lists to go with it.

My neighbour is digging next to my house. What are my rights?

If the work meets the section 139 triggers, the owner doing it must serve a Form 1 notice at least 20 business days before starting. You can then have a professional engineer specify shoring or underpinning, at that owner's reasonable cost. Read neighbour excavation in SA.

FAQ

Repairs and second opinions: common questions

Why we never sell repairs, and how an independent check works before you pay for one. Underpinning second opinions

Do you carry out repairs or underpinning?

No. We inspect, diagnose, design and certify, and never sell, recommend a contractor for or carry out repairs. That way our advice isn't tied to winning the work.

Can you check an underpinning quote I've been given?

Yes. An independent assessment from $350 + GST ($385 inc GST) tells you whether underpinning is needed and, if it is, how much and where. See underpinning second opinions.

Is salt damp a structural problem?

Sometimes. Damp-proof course work is a damp specialist's job, but we assess structural cracking, masonry so decayed that stability is affected, and temporary support during undersetting. See salt damp: the structural side.

FAQ

Site visits and areas: common questions

Where we visit, and which jobs we can do from photos and plans. Areas we cover

Which areas do you visit?

We do site visits across Greater Adelaide and the Adelaide Hills, including Mount Barker. Desktop reviews, design and certification from photos and plans are available anywhere in South Australia. See areas we cover.

Do you always need to visit the site?

No. Your quote says whether the job needs a visit. Inspections, crack reports and dilapidation reports do, while quote reviews and many designs and certificates can be done from photos and plans.

Can you help with a property outside Adelaide?

Yes, from photos and plans. A desktop review starts at $350 + GST ($385 inc GST) and is available anywhere in South Australia.

FAQ

Reports and cracks: common questions

What an engineer's report contains, how it differs from a building inspection and why Adelaide houses crack. Structural inspection and report

What's in a structural engineer's report?

Our report says what was inspected, what was seen and measured, the likely cause, how serious it is and what to do next, with photos and the limits of the inspection. Wall cracks are rated against the AS 2870 damage categories.

Building inspector or structural engineer: which do I need?

A building inspector reports on a property's general condition; a structural engineer assesses the structure itself, works out why it is cracking or moving and can design the fix. Many buyers start with a building inspection and call an engineer when it flags something structural. Read building inspector or structural engineer?

Why do so many Adelaide houses crack?

Much of Adelaide sits on highly reactive clay that swells when wet and shrinks as it dries, and every site needs its own classification. Trees, leaking pipes and poor drainage add to the movement. Read reactive clay soils in Adelaide.

FAQ

Commercial and builders: common questions

Engineering for commercial buildings, developers, builders, designers and certifiers. Commercial structural engineering

Do you work on commercial buildings?

Yes: fit-outs, mezzanines, new openings, steel structures, warehouses, townhouses and infill, and commercial building inspections. Commercial work is priced by fixed quote per project; see commercial structural engineering.

Can you certify structural calculations for a certifier?

Yes. A Building Level 2 or Level 3 accredited professional can grant building consent only once the structural calculations are certified by an independent technical expert. We certify calculations we had no part in preparing, from $390 + GST; see engineer's certificates.

Do you work for builders and designers?

Yes. We prepare structural drawings, calculations and certificates for builders, building designers and architects, documented for the certifier. See for builders and designers.

FAQ

Insurance and other limits: common questions

What our reports can be used for, and the work we leave to others. General information only, not legal or insurance advice. Website terms of use

Can I use your report for an insurance claim?

You can give it to your insurer. It sets out the engineering facts, such as the likely cause and how serious the damage is, but the insurer decides the claim under your policy, so we can't predict the outcome.

Does building indemnity insurance cover engineering advice?

No. Building indemnity insurance is the builder's policy, needed for domestic building work of $20,000 or more that needs approval, with $250,000 of cover. It doesn't cover engineering advice.

Do you prepare BAL (bushfire) assessments?

No, we don't do BAL assessments. Once you have one, we can design the structure to suit it.