About us

Independent structural engineers in Adelaide

Adelaide Structures is a structural and civil engineering practice for homes and commercial projects. We inspect, diagnose, design and certify. We never sell, recommend a contractor for or carry out repairs.

Gloved hands holding a clipboard checklist and a torch in front of a bluestone villa wall with red-brick quoins

In short

Adelaide Structures is an independent structural and civil engineering practice for homes and commercial projects. We inspect, diagnose, design and certify, with site visits across Greater Adelaide and the Adelaide Hills and desktop work anywhere in South Australia. We never sell or carry out repairs, so our advice follows the evidence. Every job starts with a fixed quote in under 20 minutes on average, during business hours.

Standards
NCC and Australian Standards
Independent
Engineering only, no repairs sold
Site visits
Greater Adelaide and the Adelaide Hills
Desktop work
SA-wide, from photos and plans
Quotes
Fixed, in under 20 min on average

Who we are

What does Adelaide Structures do?

Adelaide Structures answers structural questions about buildings and the ground they sit on, then puts the answer in writing. We work for homeowners, buyers, builders, designers and business owners, and the questions are usually practical ones:

  • Why is this wall cracking, and is it getting worse?
  • Does the house really need the underpinning I've been quoted for?
  • Can this wall come out, and what beam replaces it?
  • Will this retaining wall hold the slope, and does it need approval?
  • What does my certifier need from an engineer before Building Rules Consent?

We answer with measurements, calculations and the Australian Standards, and explain the result in plain English. A report tells you what we found, the likely cause, how serious it is and what to do next. A design gives your builder drawings to price and your certifier calculations to assess.

Adelaide gives an engineer plenty to think about. Much of Adelaide sits on highly reactive clay, and every site needs its own classification. ABS data for 2019–20 shows 6.5% of South Australian houses have major cracks in ceilings or floors, the highest share of any state or territory. Add bluestone and sandstone villas laid in lime mortar, post-war brick veneer, sloping blocks in the Hills and steel-framed commercial buildings, and no two jobs are the same.

Printed engineer's report with photo pages, a crack-width gauge card, glasses, a red pen and a laptop showing a floor plan
Figure 1A report you can act on: what was found, the likely cause, how serious it is and what to do next.

Checking the work

How can you check an engineer's work?

South Australia does not currently register engineers, so look at the work itself: what was measured, the standards it follows and a clear answer, in a document your certifier, builder or buyer can check.

DetailWhat it meansOurs
StandardsThe codes and standards the design or assessment follows, named in the document so your certifier can check themNCC and Australian Standards
IndependenceWhether the engineer, or the business, also earns from the repairEngineering only, no repairs sold
ABNAustralian Business Number22 651 397 410

Engineers and South Australian law

South Australia consulted on registering engineers in 2023, and Engineers Australia reported in April 2026 that the state had paused the process. The planning regulations still name engineers in two places that matter to homeowners:

  • Neighbour excavation (s139): a "professional engineer" is a corporate member of Engineers Australia, or on the National Engineering Register, with civil or geotechnical competence.
  • Building Level 2 and Level 3 consent: the certifier needs the structural calculations certified by an independent technical expert who had no part in the project.

Our structural design follows the National Construction Code and the Australian Standards, and we provide independent certification of structural calculations for your certifier.

Engineering only

Why are we engineering only?

Because the engineer who diagnoses a problem shouldn't also earn from fixing it. We inspect, diagnose, design and certify, and nothing else, so our advice can follow the evidence all the way to "no repair needed".

When the assessor also sells the repair

  • The diagnosis and the repair quote come from the same company
  • The method suggested is often the one that company installs
  • Monitoring or a drainage fix earns that company nothing
  • The engineer may be engaged by the contractor, not by you

An independent engineer

  • Works for you, and is paid the same whatever the answer
  • Finds the likely cause before any repair is scoped
  • Can recommend no repair, maintenance or monitoring
  • Designs a repair any suitable builder can price and build

Underpinning, resin injection, salt damp treatment and wall removal are where this matters most in Adelaide, because many of the contractors who quote them bring their own engineer. Our independent underpinning assessment starts at $350 + GST ($385 inc GST) and tells you whether underpinning is needed at all and, if it is, how much and where.

How we work

How do we work?

The same six habits on every job, from a desktop review of a few photos to a commercial mezzanine.

Measure before we judge

Crack widths, floor levels and wall leans are measured and recorded, so the next inspection can show whether anything has changed.

Find the cause first

Clay, trees, leaking pipes, drainage, fill or the way the house was built. The repair only makes sense once the cause is known.

Say when nothing is needed

Many cracks are cosmetic. If the right answer is to monitor, fix a leak or regrade the garden, the report says so.

Fix the fee first

Published starting prices from $350 + GST, and a fixed quote for your job before any work starts.

Write for the next reader

Reports and drawings your builder can price, your certifier can assess on PlanSA and a buyer or insurer can follow.

Name the other specialists

If you need a geotechnical engineer, an arborist, a damp specialist or a land surveyor, we tell you, and say why.

How a job works, step by step · All prices

Who we work for

Who do we work for?

Homeowners, buyers, builders, building designers, business owners and developers. The engineering is the same careful work; the documents change with the job.

Residential

Homeowners, buyers & builders

Cracks, sloping floors, salt damp, renovations, retaining walls, verandahs and a pool in the backyard.

All home services →

Commercial

Owners, developers & designers

Fit-outs, mezzanines, steel structures and small multi-residential projects, documented for your certifier.

Commercial overview →

Where we work

Where do we work?

We visit sites across Greater Adelaide and the Adelaide Hills, in 20 council areas: City of Adelaide, Adelaide Hills Council, City of Burnside, Campbelltown City Council, City of Charles Sturt, Town of Gawler, City of Holdfast Bay, City of Marion, City of Mitcham, City of Norwood Payneham & St Peters, City of Onkaparinga, City of Playford, City of Port Adelaide Enfield, City of Prospect, City of Salisbury, City of Tea Tree Gully, City of Unley, Town of Walkerville, City of West Torrens and Mount Barker District Council. Desktop reviews, design and certification from photos and plans are available anywhere in South Australia.

All areas and councils we cover

Our boundaries

What do we do, and what don't we do?

We stay inside engineering. Clear limits keep the advice independent and tell you who else your project may need.

We do

  • Inspect, measure and photograph cracks, movement and structural defects
  • Work out the likely cause, and say so when a soil test or further investigation is needed to confirm it
  • Design beams, footings, retaining walls, verandahs, pools, stormwater, extensions and repairs
  • Certify structural calculations independently for your certifier
  • Supply the engineer's certificates or reports your consent lists for completion

We don't

  • Sell or carry out repairs, underpinning, resin injection, salt damp treatment or wall removal
  • Recommend a contractor for the work
  • Grant Planning Consent or Building Rules Consent: your council or an accredited professional does
  • Sign the Statement of Compliance: the builder signs Part A and the owner Part B
  • Prepare BAL assessments, install damp-proof courses or give legal or insurance advice

Standards and rules

Which standards and rules do we work to?

The National Construction Code, the Australian Standards and the South Australian planning rules that apply to the job, named in the report or design so your certifier can check them.

NCC 2022 (as amended)
The National Construction Code edition that applies in South Australia until 30 April 2027. The NCC 2025 Building Code applies from 1 May 2027.
AS 2870
Residential slabs and footings: the site classes (A, S, M, H1, H2, E, P) used for footing design, and the damage categories used to rate wall cracks.
Earthquake design
Adelaide's earthquake hazard is the highest of the capital cities and is part of our design checks.
PlanSA and the Code
Applications are lodged on PlanSA and assessed against the Planning and Design Code. Planning Consent and Building Rules Consent together make up Development Approval. Read building approvals in SA.
PDI Act section 139
The rules for excavation and fill next to a neighbour's building, including the 20 business day notice. Read neighbour excavation in SA.

FAQ

About us: common questions

Still unsure? Call 08 7083 9853 or send photos for a fixed quote.

Does South Australia register engineers?

No. South Australia does not currently register engineers, and the state's planned scheme has been paused. Our structural design follows the National Construction Code and Australian Standards.

Why don't you carry out repairs?

So our advice never depends on selling work. With nothing to install, we can tell you when the answer is fixing a leak, moving a downpipe or watching a crack. If a repair is needed, we design it so any suitable builder can price it.

Can you recommend a builder or repair contractor?

No. We don't refer or recommend contractors, so nothing in our advice depends on who does the work. Our designs and repair specifications are written for any builder to price.

Do you prepare bushfire (BAL) assessments?

No, we don't do BAL assessments. Once you have one, we can design the structure to suit it.

Do you work on commercial projects?

Yes. We design and certify fit-outs, mezzanines, steel structures, warehouses and townhouse or infill projects, and inspect commercial buildings. Commercial work is priced by fixed quote per project.