
Owners · Buyers · Heritage architects
Bluestone, sandstone and heritage homes
Adelaide's bluestone and sandstone villas were built with lime mortar, often on shallow footings, long before modern footing standards. We assess them, design repairs that work with the original fabric, and write the structural condition reports that heritage and demolition decisions rely on.
- Fixed quoteper job, agreed before we start
- Under 20 minaverage time to a fixed quote
- Engineering onlya builder or stonemason does the work
In short
A heritage building engineer assesses bluestone, sandstone and other older homes and designs repairs that keep as much original fabric as possible. In Adelaide that includes condition reports for the Historic Area Overlay, where demolition can rely on the original building's "structural integrity or safe condition" being "beyond reasonable repair" (PO 7.1). Every job is priced by fixed quote before we start.
- Fee
- Fixed quote per job, agreed before we start
- Typical homes
- Bluestone and sandstone villas and cottages with lime mortar and brick quoins
- You receive
- Condition report, repair design or a demolition condition report
Approvals
Which heritage rules affect a stone home in Adelaide?
Four layers can apply to an older Adelaide home, and they change what you can repair, alter or demolish without approval. Your council, or the online Planning and Design Code, confirms which apply to your property.
| Layer | Where it comes from | What it means for structural work | What the engineer provides |
|---|---|---|---|
| State Heritage Place | Heritage Places Act 1993 | The usual exemptions for minor work, such as small decks or low retaining walls, don't apply | Condition reports and repair designs for the application |
| Local Heritage Place | Local Heritage Place Overlay in the Code | Demolition is assessed against PO 6.1; low retaining walls and pergolas lose their usual exemption | Condition reports and repair or alteration designs |
| Historic Area Overlay | The Code, with a Historic Area Statement for each area | Demolition is assessed against PO 7.1, including the "beyond reasonable repair" test; decks and front fences lose some exemptions | A structural condition report that addresses PO 7.1 |
| Character Area Overlay | The Code, with Character Area Statements | Different from a Historic Area; check with your council before planning demolition | Condition and repair advice if needed |
A summary, not legal advice. The Code changes often; your council or certifier confirms what applies to your site.
Where are Adelaide's Historic Areas?
The Code has Historic Area Statements across Greater Adelaide: 28 in Unley, 26 in Norwood Payneham & St Peters, 23 in Charles Sturt, 19 in Mount Barker, 14 in the City of Adelaide and 9 in Gawler, among others. They describe the materials of each area, such as bluestone, sandstone, pisé and brick in Norwood, or sandstone and limestone with red brick quoins in Gawler East.
The list keeps growing. In October 2025 a Code amendment added 20 inter-war Local Heritage Places in Norwood Payneham & St Peters and a new Historic Area at Heathpool.

Demolition
Can a Historic Area home be demolished if it is beyond repair?
It can be, if the structural case is made. Under the Historic Area Overlay, buildings that show the area's historic characteristics are not demolished unless the front has been substantially altered and can't reasonably be restored, or the structural integrity or safe condition of the original building is beyond reasonable repair. That second test turns on an engineer's evidence.
A demolition condition report records the footings, walls, roof and floors, rates the damage, explains the cause and sets out what a reasonable repair would involve. It doesn't argue for an outcome: if the building can reasonably be repaired, the report says so. The planning case and the heritage documentation are prepared by your planner, architect or heritage consultant.
Damage from building work next door is a related risk for old stone homes: in April 2026 a demolition application for an 1851 Local Heritage Place in the city went before the City of Adelaide's panel after cracking allegedly caused by neighbouring construction. A dilapidation report before nearby work starts records the condition while it can still be proven.
Historic Area Overlay, PO 7.1
Demolition can rely on the front being substantially altered and not reasonably restorable, or on "the structural integrity or safe condition of the original building" being "beyond reasonable repair". Local Heritage Places are assessed under the Local Heritage Place Overlay (PO 6.1).
- Condition of footings, walls, roof framing and floors, with photos
- Cracks measured and rated against the AS 2870 damage categories
- The likely cause, and whether it is still active
- What a reasonable repair involves, so the planner and council can weigh it
Common problems
What structural problems do bluestone and sandstone homes have?
Bluestone and sandstone homes most often suffer from shallow footings on moving clay, salt damp at the base of the walls and decayed timber over openings. Each building is assessed on its own evidence.
Shallow footings
Stone or rubble footings close to the surface. Much of Adelaide sits on highly reactive clay, so cracks open and close with the seasons.
Lime mortar and repointing
Soft lime mortar lets moisture out through the joints. Hard cement repointing can trap it and damage the stone.
Salt damp
Salts rise into the base of the walls and break down mortar, brick and soft stone. See the structural side of salt damp.
Roof spread
Roofs without adequate ceiling ties push the tops of walls outward, showing as cracks near the eaves.
Lintels and arches
Timber lintels decay and brick arches drop, cracking the stone over windows and doors.
Bulging walls
Thick stone walls can have a rubble core between two faces. When the bond weakens, a face can bulge.
Is a crack in a bluestone wall serious?
A crack in a bluestone wall is serious when it is wide, growing or comes with other signs, such as doors that bind or a wall that leans. Many cracks in old stone are old and stable. We measure each one, rate it against AS 2870 and, where the answer isn't clear, recommend readings over the seasons before any repair is designed.
Read more in our guide to looking after a bluestone home, or get a crack and footing movement report.

Our approach
How do you repair a stone home without losing its character?
You repair a stone home by finding the cause first, then doing the least work that fixes it, with materials that suit the original. A crack in a bluestone wall is a symptom, and the cause is often water rather than the wall.
Do
- Fix drains, downpipes and leaks before any structural repair
- Monitor cracks through a dry and a wet season before deciding on underpinning
- Use lime mortar for soft stone and old brick
- Keep original fabric, and make new structure identifiable where possible
- Record the condition before nearby excavation or building work
Don't
- Repoint or render bluestone with hard cement
- Underpin a whole house because of one crack
- Remove walls or chimneys without checking what they carry
- Dig beside shallow old footings without a design
- Seal stone with coatings that stop it drying out
General conservation practice for old masonry. The City of Adelaide's guide to architectural periods and styles describes how early buildings used limestone, bluestone and sandstone with lime mortar and render.
How it works
How does a heritage structural assessment work?
- Step 1
Tell us about the building
Photos of the problem, the house's approximate age, whether it is listed or in a Historic Area, and what you plan to do.
- Under 20 min on average
Get a fixed quote
During business hours (Mon–Fri 8:00am–5:00pm): what's included, whether footings need exposing and when you'll have the report.
- On site
Inspect and record
Cracks measured and rated, footings exposed where needed, and the structure recorded.
- On the date in your quote
Report
The condition, the cause and what to do, written for you, your architect or heritage consultant and the council.
- Only if needed
Repair or alteration design
Drawings and calculations that respect the original fabric, with stage inspections while a builder or stonemason does the work.
Bluestone and heritage homes
Every old building is different, so we price each job from your photos and plans, and fix the price before we start.
- Condition assessment of the structure
- Demolition condition reports for the Historic Area Overlay
- Repair or alteration designs for your builder and certifier
- No repair work to sell you, ever
Buying a bluestone cottage or villa?
A pre-purchase structural inspection from $990 + GST ($1,089 inc GST) tells you what the cracks or sloping floors mean before you commit.
Related services
Often needed in older stone homes

Salt damp: the structural side
What rising damp and salt attack have done to your walls, which repairs are structural, and how to support a wall while it is underset. We never sell salt damp treatment.
from$990+ GST$1,089 inc GSTLearn more
Underpinning: independent assessment
An independent engineer checks whether the underpinning or resin injection you've been quoted is needed, then designs it if it is. We never sell or carry out underpinning.
from$350+ GST$385 inc GSTLearn more
Pre-purchase structural inspection
When the building inspector flags cracks or movement, an independent engineer explains the cause, how serious it is and what a fix would involve, before you commit.
from$990+ GST$1,089 inc GSTLearn moreFAQ
Bluestone and heritage home FAQs
Still unsure? Call 08 7083 9853 or send photos for a fixed quote.
Can a house in a Historic Area be demolished if it is structurally unsound?
Possibly. Historic Area Overlay PO 7.1 allows demolition where the front has been substantially altered and can't reasonably be restored, or where the original building's structural integrity or safe condition is beyond reasonable repair. An engineer's condition report is central to that case; the council decides.
Does a Character Area house need demolition approval?
Check with your council. The demolition controls we can point to apply to Local and State Heritage Places and the Historic Area Overlay; the Character Area Overlay works differently.
What is the difference between a Local and a State Heritage Place?
State Heritage Places are listed under the Heritage Places Act 1993, and the usual exemptions from approval don't apply to them. Local Heritage Places sit in the Planning and Design Code's Local Heritage Place Overlay, which has its own demolition rules. Your council can confirm a listing.
Should bluestone be repointed with cement mortar?
Generally not. Lime mortar is softer and more breathable than cement, so the wall dries out through its joints. Hard cement repointing can trap moisture and salts and damage the stone and brick around it.
Why does my bluestone wall have cracks?
Common causes are shallow footings moving on reactive clay, water from leaking pipes or downpipes, roof spread, failed lintels and salt damp at the base. Many cracks in old masonry are old and stable; measuring them over time shows which.
Do you prepare heritage impact statements?
No. A heritage consultant or architect prepares the heritage documentation. We provide the structural assessment, condition report and repair design that go with it.
Can I remove a wall in a bluestone villa?
Often, with approval. Internal walls in stone villas are usually solid masonry carrying the roof and ceilings, so the beam, posts and footings need careful design. See wall removal and beam design.
How much does a heritage structural assessment cost?
Every old building is different, so we price each job by fixed quote from your photos. A pre-purchase structural inspection starts from $990 + GST and a salt damp structural assessment from $990 + GST.