Services
Structural engineering services in Adelaide
Every service we offer for Adelaide homes and commercial projects, with starting prices ex GST and the inc GST figure beside them. Engineering only: we inspect, diagnose, design and certify, and never sell the repair.

In short
Adelaide Structures offers 17 home services and 4 commercial services, with site visits across Greater Adelaide and the Adelaide Hills and desktop work anywhere in South Australia. Starting prices run from $350 + GST ($385 inc GST) for a desktop review to $1,200 + GST for footing and slab design. Commercial work, granny flats, extensions, defect reports and heritage homes are priced by fixed quote.
- Prices
- From $350 + GST, or a fixed quote per job
- Quote
- Fixed, in under 20 minutes on average, during business hours
- Site visits
- Greater Adelaide and the Adelaide Hills; desktop work anywhere in South Australia
- Independent
- Engineering only: no repair to sell
All services
What structural engineering services do we offer in Adelaide?
We offer inspections and reports, design for building work, certificates and commercial engineering. Prices are starting fees ex GST with the inc GST figure beside; "Fixed quote" means a fixed price for your job before anything starts.
An engineer's report on what's happening to a building, why, and what to do about it.
Structural inspection & report
A report on what's wrong, why it's happening and what to do next.
from$990+ GST$1,089 inc GST InspectionCracks & footing movement
Cracks measured and mapped, the cause found and the repair priority set.
from$990+ GST$1,089 inc GST Buying a homePre-purchase structural inspection
When the building inspector flags something structural before settlement.
from$990+ GST$1,089 inc GST Second opinionUnderpinning: independent assessment
Is the underpinning you've been quoted actually needed? We tell you straight.
from$350+ GST$385 inc GST InspectionSalt damp: the structural side
What rising damp has done to your walls, and which repairs are structural.
from$990+ GST$1,089 inc GST ReportDilapidation reports
A dated condition record before nearby building or excavation starts.
from$690+ GST$759 inc GST ReportBuilding defect reports
Independent reports on structural defects in new and recent building work.
Fixed quote HeritageBluestone & heritage homes
Careful assessment of bluestone, sandstone and lime mortar walls.
Fixed quoteDrawings and calculations your builder can price and your council or certifier can approve.
Wall removal & beam design
Beam, posts and footings drawn up so your builder can price and build them.
from$790+ GST$869 inc GST RenovationExtensions & renovations
Structural design for additions, second storeys and renovations, priced per project.
Fixed quote New buildGranny flat engineering
Footing, slab and frame engineering for a granny flat in your backyard.
Fixed quote DesignRetaining walls
Designs for sloping blocks, boundaries and Adelaide Hills sites.
from$790+ GST$869 inc GST New buildSite classification & footings
Site classification and footing design for new homes and extensions.
from$1,200+ GST$1,320 inc GST OutdoorVerandahs, pergolas, carports & decks
Engineering and certificates for council or your building certifier.
from$490+ GST$539 inc GST OutdoorPool engineering
In-ground pools on slopes, near boundaries and close to the house.
from$890+ GST$979 inc GST DesignStormwater & drainage plans
Drainage designs that keep water away from your footings.
from$790+ GST$869 inc GSTSign-off for work already built, and independent certification of calculations for your certifier.
Engineer's certificates
Sign-off for completed structural work, ready for your certifier.
from$390+ GST$429 inc GSTNot on the list?
Send photos or plans. You'll get a fixed quote in under 20 min on average.
Fit-outs, steel buildings, townhouses and inspections, priced by fixed quote per project. Commercial overview
Fit-outs & mezzanines
New openings, mezzanine floors and plant loads in existing buildings.
Fixed quote CommercialSteel structures & warehouses
Steel frame design and steel frame certification for sheds, warehouses and canopies.
Fixed quote CommercialTownhouses & infill
Structural design for townhouses, units and small infill developments.
Fixed quote CommercialCommercial inspections
Condition and defect reports for owners, buyers and tenants.
Fixed quoteChoosing a service
Which structural engineering service do I need?
The right service depends on what you're seeing or planning. Start from your situation in the table. If none fits, choose "Not sure, please advise" on the quote form and we'll recommend one.
| Your situation | The service | Starting price |
|---|---|---|
| Cracks in walls, sticking doors or sloping floors | Cracks & footing movement report | From $990 + GST ($1,089 inc GST) |
| Buying a home and the building inspector flagged something | Pre-purchase structural inspection | From $990 + GST ($1,089 inc GST) |
| Quoted for underpinning or resin injection and unsure it's needed | Underpinning: independent assessment | From $350 + GST ($385 inc GST) |
| Salt damp, crumbling mortar or a bulging stone wall | Salt damp: the structural side | From $990 + GST ($1,089 inc GST) |
| Opening up a load-bearing wall | Wall removal & beam design | From $790 + GST ($869 inc GST) |
| Building on a slope, or a wall retaining more than 1 m | Retaining wall engineering | From $790 + GST ($869 inc GST) |
| New home, addition or slab needing a soil test | Site classification & footings | From $1,200 + GST ($1,320 inc GST) |
| Verandah, pergola, carport or deck for council | Verandahs, pergolas, carports & decks | From $490 + GST ($539 inc GST) |
| An in-ground pool on a slope or near the house | Pool engineering | From $890 + GST ($979 inc GST) |
| Council asked for a drainage plan or rainwater tank design | Stormwater & drainage plans | From $790 + GST ($869 inc GST) |
| Neighbour about to excavate, demolish or build | Dilapidation report | From $690 + GST ($759 inc GST) |
| Certifier asked for an engineer's certificate | Engineer's certificates | From $390 + GST ($429 inc GST) |
| Defects in new work, or a dispute with a builder | Building defect reports | Fixed quote |
| An extension, second storey or granny flat | Extensions or granny flats | Fixed quote |
| A bluestone or sandstone villa | Bluestone & heritage homes | Fixed quote |
| A fit-out, mezzanine, steel building, townhouses or a commercial inspection | Commercial engineering | Fixed quote |
Not sure? Ask for advice with a quote or read do I need a structural engineer?
Where to start
Desktop review, site inspection or full report: which one first?
Start with the smallest step that answers your question. A desktop review suits a quote you want checked or photos of one problem; a site inspection with a letter suits one issue that needs eyes on site; a full report suits a whole building, a purchase or a dispute.
| Compare | Desktop review | Site inspection and letter | Structural inspection and report |
|---|---|---|---|
| From, ex GST | $350 + GST | $550 + GST | $990 + GST |
| inc GST | $385 | $605 | $1,089 |
| Site visit | No: photos, plans or a contractor's quote | Yes | Yes |
| You receive | Written advice on what you sent | A written letter of advice on one issue | A report on the structure, with causes and priorities |
| Good for | An underpinning or repair quote second opinion, anywhere in SA | One crack, one wall or one question | Several issues, pre-purchase, insurance or a dispute |
If a desktop review shows a site visit is needed, we say so before you pay for one. See how it works.
Civil engineering
Do you also do civil engineering in Adelaide?
Yes. Civil engineering for homes and small developments is part of what we do, alongside the structural work. On Adelaide sites that usually means:
- Stormwater and drainage plans, including the rainwater tank and detention sizes the Code's Stormwater Management Overlay sets for new dwellings.
- Site classification and footings: much of Adelaide sits on highly reactive clay, and every site needs its own classification.
- Retaining walls: a wall retaining more than 1 m is development and needs approval.
- Neighbour excavation: a section 139 notice at least 20 business days before work near a boundary.
South Australia does not currently register engineers. Our design follows the National Construction Code and Australian Standards.
How every service works
Send photos or plans
Use the quote form with your suburb and any deadline, such as settlement, a council date or a builder's start.
Get a fixed quote
In under 20 minutes on average, during business hours, with what's included and whether a site visit is needed.
Report or design
Ready for your buyer, builder, insurer, council or certifier.
What does a structural engineer do?
A structural engineer works out how a building carries its loads, inspects structures that are cracking or moving, and designs and certifies footings, beams, walls and frames. We inspect, diagnose, design and certify; we never sell or carry out repairs.
What's the difference between a civil and a structural engineer?
Structural engineering is the building itself: footings, walls, beams and frames. Civil engineering is the ground and water around it, such as stormwater, drainage, retaining walls and site works. We do both for homes and small developments.
Are your engineers registered?
South Australia does not currently register engineers. Our structural design follows the National Construction Code and Australian Standards.
Do all services need a site visit?
No. Photos or plans are enough to quote, and some services, such as a desktop review or an underpinning quote second opinion, are done from documents alone, from $350 + GST ($385 inc GST). Your quote says whether a site visit is needed.
Which areas do you cover?
Site visits across Greater Adelaide and the Adelaide Hills. Desktop reviews, design and certification from photos and plans anywhere in South Australia. See areas we cover.
Do you do bushfire (BAL) assessments?
No. We don't prepare bushfire attack level assessments. We do the structural and civil engineering, and work alongside the bushfire requirements your designer or certifier sets out.
Do you carry out repairs?
No. We are engineering only. If a repair is needed, we design it and any licensed builder can build it. We don't sell repairs or recommend contractors.