Excavated pit beside the sandstone footing of an older house, with a new concrete underpin under the footing, timber shoring boards and dark clay

Homeowners · Buyers · Builders

Underpinning in Adelaide: an independent assessment

Before anyone digs under your footings, find out whether underpinning is the right fix. We review underpinning and resin injection quotes, assess the house independently and, where underpinning is needed, design it for any builder to price. We never sell or carry out underpinning, so nothing rides on our answer.

  • From $350+ GST ($385 inc GST), quote second opinion
  • Under 20 minaverage time to a fixed quote
  • Engineering onlywe never sell or install it
Quote requestMon–Fri 8am–5pm

Get a fixed quote for an underpinning assessment

Send the underpinning or resin injection quote, any engineer's report that came with it, photos of the cracks and the suburb.

We reply with a fixed quote in under 20 minutes on average, during business hours.

Engineering only
Second opinion from $350 + GST
Quotes in under 20 min on average
NCC & Australian Standards

In short

Underpinning deepens or strengthens a house's footings after they have moved. In Adelaide, have the need confirmed by an engineer who doesn't sell it: our second opinion on an underpinning or resin injection quote starts from $350 + GST ($385 inc GST), from the documents and photos. Underpinning usually needs building consent; we confirm with your council or certifier.

Fees
Second opinion from $350 + GST ($385 inc GST); design by fixed quote
Approvals
Usually building consent; we confirm with your council or certifier
Independent
We never sell, recommend or carry out underpinning

Diagnosis first

Do you actually need underpinning?

Not always. Underpinning helps when a footing has lost support or sits on ground that will keep moving after the cause is fixed. Cracks from seasonal clay movement, a leaking pipe or a downpipe soaking a footing are fixed at the source, and they often settle once the water is controlled.

Adelaide's clays can move well below a shallow footing: Adelaide University's 2026 study modelled moisture changes to 3.8 m in uncracked soil, close to the four metres it says is recommended for Adelaide residential construction. A fix that only treats the top of that zone may not stop the movement. That is why the cause should be confirmed by someone with nothing to sell, and our crack and footing movement report does that from $990 + GST ($1,089 inc GST).

A repair contractor

  • Is paid when the underpinning goes in
  • Usually offers one system
  • Often supplies its own engineer's assessment

An independent engineer

  • Is paid the same whatever the answer
  • Chooses the method that suits the soil
  • Designs it for any builder to price

Four questions before you underpin

  1. Has an independent engineer confirmed the cause?

    Cracks alone don't prove a footing needs underpinning.

    Yes: go to 2No: crack report first
  2. Have leaks, downpipes and drainage been fixed?

    Water is a common trigger for movement in reactive clay.

    Yes: go to 3No: fix the water first
  3. Is the footing still moving after that?

    Readings through a dry and a wet period show whether movement is ongoing.

    Yes: underpinning may be justifiedNot sure: monitor
  4. Has a contractor already quoted?

    Check the scope and method before you sign.

    Yes: second opinionNo: we can design it

Second opinion

Should you get a second opinion before you pay for underpinning?

Yes, especially when the engineer's assessment came with the contractor's quote. An underpinning job is priced in the thousands of dollars, often far more. We don't sell repairs, so our advice is only about your house, and if the underpinning isn't needed, our report says so.

Book an independent assessment

Quote second opinion from $350 + GST
($385 inc GST)

  • Underpinning

    Is it needed at all? If it is, how much, and where?

  • Resin injection

    Will it fix the cause of the movement, or only the symptom?

  • The scope

    Are the underpins placed where the house actually moved?

  • The price

    Does it include design, consent, inspections and the drainage work?

What we check

What does an underpinning quote second opinion check?

An underpinning quote second opinion is an independent engineer's review of a contractor's quote or report, from the documents and photos, to check whether the evidence supports the work and the scope is right.

  • Does the evidence (crack pattern, levels, timing) point to footing movement, or to something else?
  • Are the number and position of underpins matched to where the house has moved?
  • Does the method suit the soil, the depth to firm ground and the cause?
  • Does the price include engineering design, building consent and inspections during the work?
  • Are the leaks, downpipes or drainage that caused the movement being fixed too?
  • For domestic work of $20,000 or more that needs approval, will the builder give you a building indemnity insurance certificate before starting?
Documents and photos, no visit

Underpinning quote second opinion

$350+ GST · $385 inc GST · starting price

A written opinion on whether the evidence supports underpinning, whether the scope and method make sense, and what to ask the contractor. If the documents can't answer the question, we say what would, such as a site inspection or a soil test. Available anywhere in South Australia.

Crack and footing movement report (site visit)From $990 + GST
Underpinning design and inspectionsFixed quote
Send the quoteSee all prices

Methods

Which underpinning method suits an Adelaide house?

The method should follow the soil, the depth to firm ground and the cause of movement, not the system a contractor sells. This comparison reflects general engineering practice; we don't sell any of these systems.

MethodHow it worksOften suitsWatch for
Mass concreteConcrete cast in short sections under the existing footing, down to firmer groundStrip footings under bluestone, sandstone or brick walls, where firm ground is not too deepDigging beside an old footing needs a set sequence; deep firm ground adds cost
Bored piers and beamsHoles drilled to firmer ground and filled with reinforced concrete, joined to the house by a beamDeeper firm ground, or where a new beam is needed anywayDrilling access, and how the beam connects to old footings
Screw pilesSteel piles screwed into firmer ground and tied to the footing with brackets or a beamTight access, or where little excavation is wantedCorrosion protection, and proof each pile reached its design depth or torque
Resin injectionExpanding resin injected into the soil under the footing to fill voids, densify it and sometimes lift the footingVoids or soft soil close under a footing or slabIt doesn't carry load down to deeper ground, so it may not suit deep reactive clay; the water source still needs fixing

Three common underpinning methods, side by side

Mass concrete underpinning, screw piles and resin injection compared Three simplified sections of a wall on a strip footing. In the first, a concrete block is cast under the footing down to firmer ground. In the second, a steel screw pile beside the footing reaches firmer ground and is connected to the footing with a bracket. In the third, resin is injected through small tubes into the soil under the footing. firmer ground firmer ground firmer ground 1 · Mass concrete 2 · Screw pile 3 · Resin injection
  • 1 · Mass concrete: concrete is cast in short sections under the footing, down to firmer ground.
  • 2 · Screw piles or piers: steel piles are driven or screwed to a firmer layer and tied to the footing with brackets or a new beam.
  • 3 · Resin injection: expanding resin is injected into the soil under the footing to fill voids, densify it and sometimes lift the footing.
Figure 1Simplified sections, not to scale. The right method depends on the soil, the cause of movement and the building, so the diagnosis has to come first. We design and certify; we don't sell any method.Illustrative diagram. Prepared by Adelaide Structures.

Design · fixed quote

What does underpinning design include?

Underpinning design covers what your certifier and builder need, from confirming the cause to the documents your consent asks for at the end.

  1. Step 1

    Confirm the cause

    A site inspection, or our earlier crack report, establishes what moved and why.

  2. Where needed

    Investigate the ground

    Site classification arranged, with boreholes where the design needs them.

  3. Design

    Drawings and calculations

    Underpin layout, depths, excavation sequence and details, ready for building consent on PlanSA.

  4. During the work

    Stage inspections

    The engineer checks critical stages, such as excavations before concrete is poured.

  5. At completion

    Completion documents

    Any certificate or report your consent lists. Your builder signs Part A of the Statement of Compliance and you sign Part B.

What rules apply to underpinning in South Australia?

Underpinning usually needs building consent; we confirm with your council or certifier. A few other rules often come into it.

  • Consent: lodged on PlanSA and granted by council or an accredited professional (a building certifier), with our drawings and calculations.
  • Neighbours: excavation near a boundary can trigger a section 139 notice, and a neighbour can have a professional engineer specify shoring or underpinning. See neighbour excavation in SA.
  • Insurance: builders need building indemnity insurance for domestic work of $20,000 or more that needs approval. It's the builder's policy, and it doesn't cover engineering advice. See SAFA.
  • Heritage: stone villas and listed homes need methods that suit old footings and lime mortar. See bluestone and heritage homes.

Cost drivers and typical ranges are in our guide: how much does underpinning cost in Adelaide? We assess homes across Greater Adelaide, including Burnside, Modbury and Elizabeth.

FAQ

Underpinning FAQs

Still unsure? Call 08 7083 9853 or send photos for a fixed quote.

How much does underpinning cost in Adelaide?

The contractor prices the building work, which depends on how many footings need support, how deep firm ground is, the method and access. Our engineering is separate: a quote second opinion from $350 + GST ($385 inc GST), and design by fixed quote. See how much underpinning costs.

Do you carry out underpinning?

No. We are engineering only: we assess, design and inspect. We never sell, recommend a contractor for or carry out underpinning or resin injection.

The underpinning company has its own engineer. Why get a second opinion?

Many underpinning and resin injection contractors include an engineer's assessment with their quote, and that engineer works with the company that will do the job. An independent engineer is paid the same whatever the answer, including when the answer is that you don't need underpinning.

Does underpinning need council approval in SA?

Underpinning usually needs building consent, lodged through PlanSA; we confirm with your council or certifier for your job. Heritage-listed homes can need more, so tell us if yours is listed.

Is resin injection the same as underpinning?

No. Resin injection fills voids and densifies the soil just under a footing; it does not carry load down to deeper ground the way concrete underpins or piers do. Whether it suits depends on the soil and the cause of movement.

Will underpinning stop all cracking?

It stops movement at the footings it supports, if the cause has been dealt with. Parts of the house that aren't underpinned can still move with the seasons on reactive clay, so leaks and drainage still need fixing.

My neighbour is excavating. Can I ask for underpinning?

If the excavation is close enough to the boundary to trigger section 139 of the PDI Act, your neighbour must give a Form 1 notice at least 20 business days before work starts, and you can have a professional engineer specify shoring or underpinning at their reasonable cost. See neighbour excavation in SA.

Do I need a soil test before underpinning?

Sometimes. The engineer decides whether the existing evidence is enough or whether a site classification and boreholes are needed for the design; much of Adelaide sits on highly reactive clay, and every site needs its own classification.