
Owners · Developers · Designers · Builders
Commercial structural engineering in Adelaide
Structural design, independent certification and inspections for fit-outs, mezzanines, steel buildings, townhouses and existing commercial buildings across Greater Adelaide. Drawings your builder can price, calculations your certifier can check, and a fixed fee before we start.
- Fixed quoteper project, before we start
- Under 20 minaverage time to a fixed quote
- Documentedfor your certifier
In short
A commercial structural engineer in Adelaide designs, checks and certifies the structure of fit-outs, mezzanines, steel buildings and townhouse developments, and inspects existing commercial buildings. You receive calculations, drawings and certificates for your council or building certifier, plus stage inspections where the consent needs them. Every commercial project is priced by fixed quote, sent in under 20 minutes on average, during business hours.
- Fee
- Fixed quote per project
- Quote
- In under 20 min on average, business hours
- You receive
- Calculations, drawings, certificates and inspections
Commercial services
What commercial structural engineering do we do?
We design, certify and inspect the structure of commercial, industrial and small multi-residential buildings across Greater Adelaide and the Adelaide Hills. Four services cover most projects, each priced by fixed quote per project.

Fit-outs & mezzanines
Mezzanine floors, shop and office fit-outs, new openings in commercial walls, heavy racking, rooftop plant and solar panel loads, designed and documented for your certifier.
Fixed quoteScope and process
Steel structures & warehouses
Steel frame design and steel frame certification for warehouses, sheds, canopies and light steel frames, with footings and slabs designed for the site's clay.
Fixed quoteScope and process
Townhouses & infill
Structural and civil design for townhouses, units and small infill developments: site classification and footings, trees near footings, framing, retaining walls, stormwater tanks and neighbour notices.
Fixed quoteScope and process
Commercial building inspections
Structural condition assessments, defect reports, concrete spalling reports and change of use assessments for offices, shops, warehouses, car parks and older stone buildings.
Fixed quoteScope and processAlso on commercial sites: stormwater and drainage plans, site classification and footings, retaining walls, dilapidation reports before you excavate next to a neighbour, and engineer's certificates for work already built.
Who we work for
Who uses a commercial structural engineer?
Owners, developers, designers, builders and certifiers all need the same thing from us: a structure that works, documented so the council or building certifier can approve it.
Owners and landlords
Condition assessments, change of use checks and repair designs for buildings you own or lease out.
Developers
Townhouse, unit and light industrial projects engineered from the site classification up, with retaining walls and stormwater in the same package.
Building designers and architects
Structural input from concept, so spans, openings and steelwork suit the design and the budget before the drawings are lodged.
Builders
Drawings you can price and build from, answers to site questions and stage inspections booked to your program. See working with builders and designers.
Tenants and fit-out managers
Mezzanines, new openings, heavy racking and rooftop plant checked before the fit-out starts.
Building certifiers
Independent certification of structural calculations prepared by others, for consents granted by a Building Level 2 or 3 accredited professional.
Approvals in South Australia
Where does the engineer fit in a commercial approval in SA?
The engineer's calculations and drawings support the Building Rules Consent, and our certificates go into the completion paperwork. Applications are lodged on PlanSA, and Planning Consent plus Building Rules Consent together make up Development Approval.
| Stage | What happens | The engineering part |
|---|---|---|
| Planning Consent | The use, siting and design are assessed against the Planning and Design Code | Early advice on spans, retaining and stormwater so the layout works |
| Building Rules Consent | Granted by the council or an accredited professional. Building Level 1 can approve any class; Level 2 up to 3 storeys or 2,000 m² | Structural drawings, calculations and the foundation investigation the application needs |
| Independent certification | A Level 2 or 3 accredited professional can only grant consent when the calculations are certified by an independent technical expert (reg 25) | We certify calculations prepared by others; our own designs go to another engineer for this check |
| Construction | The builder notifies the council at the stages it sets. Current policy is for councils to inspect 90% of new commercial buildings | Stage inspections listed in your quote, such as footings, reinforcement and the steel frame |
| Completion | The builder signs Part A of the Statement of Compliance, the owner Part B. The council then issues a certificate of occupancy before the building is used (Class 10 buildings excepted) | The certificates or reports your consent lists (reg 57(8)(c)), lodged with the Statement of Compliance |
Based on the PDI Act 2016 (s152) and the PDI (General) Regulations 2017 (regs 25, 57, 103A and 104). Your council or certifier confirms what your project needs. More in the guide to building approvals in SA.
How it works
How does a commercial project work with us?
A commercial project runs from your plans to a signed-off structure in five steps, and the fee for all of them is fixed in the quote.
- Step 1
Send plans or photos
Architectural drawings, a fit-out layout or photos of the existing building, with the address and your program.
- Under 20 min on average
Get a fixed quote
The scope, any site visits, the stage inspections and the documents you'll receive.
- Design
Calculations and drawings
We design the structure, coordinate with your designer or architect, and flag anything that changes the layout early.
- Approval
Documents for your certifier
Drawings, calculations and certificates for the Building Rules Consent, and answers to the certifier's questions.
- Construction
Stage inspections and sign-off
We inspect the stages listed in the quote and issue the engineering certificates for the completion paperwork.
Engineers in South Australia
South Australia does not currently register engineers. Our structural design follows the National Construction Code and Australian Standards.
Which code edition?
NCC 2022 (as amended) applies in South Australia until 30 April 2027, and the NCC 2025 Building Code from 1 May 2027. We design to the edition your application is assessed against.
Engineering only
We design, certify and inspect. We never build, sell repairs or recommend a contractor, so our drawings are written for your project and any licensed builder can price them.
Built for Adelaide sites
What changes a commercial design in Adelaide?
Reactive clay, earthquake design, old masonry and close neighbours change commercial designs in Adelaide more than anything else. We check each one for the actual site, never from a city-wide assumption.
Reactive clay
Much of Adelaide sits on highly reactive clay, and every site needs its own classification or geotechnical investigation before slabs and footings are designed.
Earthquake design
Adelaide's earthquake hazard is the highest of the capital cities and is part of our design checks, especially for heavy roofs, masonry and new openings.
Stone and brick buildings
Adelaide's older shops, offices and warehouses are often bluestone, sandstone or brick in lime mortar. We check how the existing walls carry load before anyone cuts into them.
Neighbours and excavation
Excavation near a boundary can trigger a section 139 notice at least 20 business days before work starts. A dilapidation report records the neighbour's building first.
Commercial project coming up?
Send the plans for a fixed quote
Drawings, a sketch or photos with the address are enough to price most jobs. You'll have a fixed fee in under 20 minutes on average, during business hours.
More commercial engineering
Also useful on commercial projects

For builders & designers
Footing, slab and beam design, retaining walls, stormwater plans, certificates and independent certification of structural calculations for builders, building designers and certifiers.
Fixed quoteLearn more
Stormwater & drainage plans
Drainage plans that size your rainwater tank and detention to the Code, route the pipes to the kerb or an easement and keep water away from your footings.
from$790+ GST$869 inc GSTLearn more
Dilapidation reports
A dated, measured record of a building's condition before excavation, demolition or building starts next door, with a follow-up report after the work.
from$690+ GST$759 inc GSTLearn moreFAQ
Commercial structural engineering FAQs
Still unsure? Call 08 7083 9853 or send photos for a fixed quote.
How much does a commercial structural engineer cost in Adelaide?
Every commercial project is priced by fixed quote, because a mezzanine, a warehouse and a row of townhouses have very different scopes. Send the plans or photos and you'll have a fixed fee in under 20 minutes on average, during business hours, listing what's included, any site visits and the stage inspections.
Do engineers have to be registered for commercial work in South Australia?
No. South Australia does not currently register engineers. A scheme for structural and fire safety engineers on more complex buildings was proposed in 2023 and has since been paused. Our structural design follows the NCC and Australian Standards.
What is an independent technical expert?
Under the PDI Regulations (reg 25), a Building Level 2 or Level 3 accredited professional can grant building consent only when the structural calculations are certified by an independent technical expert: someone who isn't the owner or their employee, wasn't involved in the development and has no financial interest in it. We provide that certification for calculations prepared by others.
Which edition of the NCC applies to my project?
NCC 2022 (as amended) applies in South Australia until 30 April 2027, and the NCC 2025 Building Code from 1 May 2027. We design to the edition your application is assessed against.
Can you work from an architect's or building designer's drawings?
Yes. Send the drawings as PDFs and we design the structure to suit them: beams, columns, bracing, footings and slabs. If a span or opening doesn't work structurally, we tell you early and suggest what would.
Do you inspect during construction?
Yes, across Greater Adelaide and the Adelaide Hills. Your quote lists the stage inspections, such as footings before the pour or the steel frame before cladding, so the builder can program them.
Do you sign the Statement of Compliance?
No. The licensed building work contractor signs Part A and the owner signs Part B. We supply the engineering certificates or reports your consent lists, which are lodged with it.
Are you consulting engineers, or do you also build?
Consulting engineers only. We design, certify and inspect, and we never build, sell repairs or recommend a contractor, so any licensed builder can price and build from our drawings.