Prices
What a structural engineer costs in Adelaide
Starting prices for every service, ex GST with the inc GST figure beside them, what each one includes and what moves a quote up or down. Every job gets a fixed quote before anything starts.

In short
A structural engineer in Adelaide costs from $350 + GST ($385 inc GST) for a desktop review, $550 + GST ($605 inc GST) for a site inspection with a letter of advice and $990 + GST ($1,089 inc GST) for a structural inspection and full report. Granny flats, extensions, defect reports, heritage homes and commercial work get a fixed quote. You have the price before any work starts.
- Fixed fees
- Agreed in your quote before we start
- GST
- Shown ex GST, with inc GST beside
- Quote time
- Under 20 min on average, Mon–Fri 8:00am–5:00pm
- Independent
- No repairs to sell, so the fee is all you pay us
Price list
How much does a structural engineer cost in Adelaide?
Our structural engineer prices in Adelaide start at these amounts for a typical house. Your fixed quote confirms the exact fee for your job and what it includes.
| Service | What's included | From, ex GST | inc GST |
|---|---|---|---|
| Inspections & reports | |||
| Desktop review of photos or plans | An engineer reviews your photos, plans or documents and sends written advice, with no site visit. Available anywhere in SA. | $350 + GST | $385 |
| Underpinning or repair quote second opinion | A written review of a contractor's underpinning, resin injection or repair quote: is the work needed, and does the scope fit the problem? | $350 + GST | $385 |
| Site inspection with a letter of advice | An engineer visits, looks at the issue you're worried about and sends a letter with findings and next steps. | $550 + GST | $605 |
| Structural inspection & full report | A site inspection and a report: what's moving, the likely cause, how serious it is and what to do next. | $990 + GST | $1,089 |
| Cracks & footing movement report | Cracks measured, mapped and rated against the AS 2870 damage categories, with the likely cause and the repair priority. | $990 + GST | $1,089 |
| Pre-purchase structural inspection | An engineer's report on cracking, movement or alterations in a home you're buying, often after the building inspector flags something. | $990 + GST | $1,089 |
| Salt damp: the structural side | What salt damp has done to the walls: structural cracking, decayed masonry and any temporary support needed for undersetting. | $990 + GST | $1,089 |
| Dilapidation report | A dated photo record of a building's condition before nearby excavation, demolition or construction starts. | $690 + GST | $759 |
| Engineer's certificate or independent certification | A structural adequacy letter for completed work, or independent certification of structural calculations for your certifier. | $390 + GST | $429 |
| Design | |||
| Wall removal & beam design | Beam, posts and footings sized and drawn so your builder can price the work and your certifier can assess it. | $790 + GST | $869 |
| Retaining wall engineering | Wall design with drawings and calculations, including walls over 1 m and walls with a fence on top. | $790 + GST | $869 |
| Footing or slab design | AS 2870 footing or slab design for a new home or extension, with the site classification arranged. | $1,200 + GST | $1,320 |
| Verandah, pergola, carport or deck engineering | Footings, posts, beams and connections, with drawings for council or your certifier. | $490 + GST | $539 |
| Pool engineering | In-ground pool shell design, including pools on slopes, near boundaries and close to the house. | $890 + GST | $979 |
| Stormwater or drainage plan | A drainage plan with tank, detention and kerb connection details that keeps water away from the footings. | $790 + GST | $869 |
| Fixed quote per job | |||
| Granny flats | Footing, slab and frame engineering for a granny flat in your backyard. | Fixed quote | |
| Extensions & renovations | Structural design for additions, second storeys and renovations, from one beam to a whole new floor. | Fixed quote | |
| Building defect reports | Independent reports on structural defects in new and recent building work, often for a dispute. | Fixed quote | |
| Bluestone & heritage homes | Old masonry, lime mortar and Historic Area condition reports, where the scope depends on the building. | Fixed quote | |
| All commercial work | Fit-outs, mezzanines, steel structures, townhouses and commercial building inspections, priced per project. | Fixed quote | |
Prices in Australian dollars. "Fixed quote" services are priced for your job from photos or plans, in under 20 minutes on average, during business hours.
Choosing the right level
Desktop review, letter or full report: which do I need?
You need a full report when someone else will rely on it, such as a buyer, an insurer or a builder in a dispute, or when the cracking is widespread. For one question about one problem, a desktop review or a site inspection with a letter is often enough.
| Compare | Desktop review | Site inspection + letter | Inspection + full report |
|---|---|---|---|
| From | $350 + GST ($385 inc GST) | $550 + GST ($605 inc GST) | $990 + GST ($1,089 inc GST) |
| Site visit | No, from your photos, plans or documents | Yes | Yes |
| You receive | Written advice on what the photos or documents show | A letter with findings and advice on the issue you asked about | A report on the structure: measurements, cracks rated against AS 2870, the likely cause, how serious it is and what to do next |
| Good for | A first view, a contractor's quote to check, or a property outside Adelaide | One crack, one sagging beam or one wall you're unsure about | Buying a home, an insurance claim, widespread cracking or a report someone else will rely on |
| Where | Anywhere in South Australia | Greater Adelaide and the Adelaide Hills | Greater Adelaide and the Adelaide Hills |
Not sure? Describe the problem on the quote form and your quote will say which level fits.
Fixed quote per job
Which services are priced only by quote?
Granny flats, extensions and renovations, building defect reports, bluestone and heritage homes, and all commercial work. Their scope varies too much for a useful starting price, so we price each one from your photos or plans.
Inclusions
What's included in the price?
The price includes everything your fixed quote lists for that job. Typically that is:
- An engineer's review of your photos, plans or documents
- A site visit, where the quote says one is needed (Greater Adelaide and the Adelaide Hills)
- The report or letter, or the drawings and calculations for a design
- Documents set out for your certifier, where the work needs Building Rules Consent
- Stage inspections and completion certificates, where the quote lists them
What isn't included is in the quote too, so nothing is a surprise. Any extra work, such as a repair design after a report, is quoted before we do it.
Desktop review of photos or plans
An engineer's written advice from your photos, plans or a contractor's quote, with no site visit, anywhere in South Australia.
About free inspections
Some underpinning, resin injection and salt damp contractors inspect for free. That inspection is paid for by the repair it leads to. Our fee is all you pay us, whatever we find, including when the answer is "no repair needed".
What changes a price
What changes the cost of a structural engineer?
The cost changes with the size of the job, whether a site visit is needed, access, the purpose of the report and any testing or inspections. The starting price covers a straightforward job on a typical house; these are the things that move a quote.
Size and complexity
More rooms, storeys, spans, walls or cracks take longer to inspect or design. Units and commercial buildings are quoted per project.
Site visit or desktop
A desktop review starts at $350 + GST and a site inspection with a letter at $550 + GST. Your quote says which the job needs.
Access and terrain
Subfloors, roof spaces, steep blocks in the Hills and tight inner-suburb sites add time on site.
Purpose of the report
A report for a builder dispute, an insurer or a court needs more detail and a set format, so tell us upfront.
Soil and site classification
Much of Adelaide sits on highly reactive clay, and every site needs its own classification. Footing design comes with the site classification arranged; your quote lists any testing.
Inspections and certificates
Designs that need stage inspections or a completion certificate include them in the quote, so you know the full fee.
How we quote
How do we quote a job?
We quote every job as a fixed fee, from your photos or plans, in under 20 minutes on average, during business hours (Mon–Fri 8:00am–5:00pm). The quote says what's included and whether a site visit is needed.
Send photos or plans
With the suburb, what you need and any deadline, such as cooling-off, settlement or a builder's start date.
Get a fixed quote
A fixed fee for your job, ex GST and inc GST, with the scope and any site visit spelled out.
Accept and we start
No hourly billing. Any change in scope is quoted before we do it.
Quote builder
Start your quote request in 30 seconds
Pick the service and what's happening, and we'll carry both into the quote form. You only add your details and any photos or plans.
- Photos help. A wide shot and a close-up of each problem is plenty.
- Building something? Attach the plans as PDFs.
- On a deadline? Tell us, for example a settlement date or a council request.
How much does a structural engineer cost in Adelaide?
From $350 + GST ($385 inc GST) for a desktop review, $550 + GST ($605 inc GST) for a site inspection with a letter of advice and $990 + GST ($1,089 inc GST) for a structural inspection and full report. Every job gets a fixed quote in under 20 minutes on average, during business hours, before work starts.
How much does a structural engineer cost to inspect a house?
A structural inspection with a full report starts at $990 + GST ($1,089 inc GST), the same as a crack and footing report or a pre-purchase structural inspection. If you only need an engineer's view on one issue, a site inspection with a letter of advice starts at $550 + GST.
How much does an engineer cost to remove a load-bearing wall?
Wall removal and beam design starts at $790 + GST ($869 inc GST): the beam, posts and footings drawn up so your builder can price the work. Removing a load-bearing wall needs approval, and the design goes with the application.
How much does it cost to have an underpinning quote checked?
An independent assessment starts at $350 + GST ($385 inc GST). It tells you whether underpinning is needed at all and, if it is, how much and where. See underpinning second opinions.
Are your prices fixed?
Yes. Your quote states a fixed fee for the job it describes, before anything starts. If the scope changes, for example a repair design is added after a report, we quote the extra work before doing it.
Do your prices include GST?
Website prices are shown ex GST with the inc GST figure beside them, for example $990 + GST ($1,089 inc GST). Your quote shows both, and GST is added on the invoice.
Why do granny flats, extensions and commercial jobs show no price?
Their scope varies too much for a useful starting price: one extension needs a single beam, another a whole new storey. We price them by fixed quote from your photos or plans, in under 20 minutes on average, during business hours.
Do structural engineers charge by the hour?
Some do. We don't bill by the hour: each job has a fixed fee in your quote, agreed before work starts, and any change in scope is quoted before we do it.