New housing estate of brick and rendered homes with young street trees and green rolling hills behind

City of Onkaparinga · South Australia

Structural engineer in Morphett Vale

The south has 1840s limestone houses at Old Reynella and new estates rising towards Sellicks Beach, often a short drive apart. Footings, granny flats and walls for the new; a careful structural eye for the old, from Morphett Vale and Reynella down to Aldinga and Sellicks Beach.

  • From $1,200+ GST for footing design, site classification arranged
  • Under 20 minaverage time to a fixed quote
  • 70 m²typical granny flat floor area limit in the Code
Quote requestMon–Fri 8am–5pm

Get a Morphett Vale quote

Photos or plans are usually enough to price the job.

We reply with a fixed quote in under 20 minutes on average, during business hours.

Engineering only
Fixed prices from $350 + GST
Quotes in under 20 min on average
NCC & Australian Standards

In short

Around Morphett Vale, structural engineering splits into two kinds of job: new homes, granny flats and extensions that need footings designed for their own site, and old limestone and sandstone houses around Old Reynella and Aldinga. Our visits cover the City of Onkaparinga down to Sellicks Beach. Footing design, with the site classification arranged, starts from $1,200 + GST ($1,320 inc GST).

Structural engineer Morphett Vale: local facts

Council
City of Onkaparinga, with 7 Historic Area Statements in the Planning and Design Code
Old Reynella
Historic Area of houses from the 1840s to the 1920s in limestone, coursed sandstone and random rubble
Aldinga
Historic Area of 1850s–1920s limestone and sandstone rubble buildings, with Willunga slate
Growth
The Sellicks Beach Growth Area entered the Code in February 2026, reported as about 1,700 new homes

What engineering does a new home or granny flat in the south need?

A site classification, a footing design to AS 2870 and, where the Code asks for it, a stormwater plan. The regulations list what goes with a building consent application, including "calculations or reports" and written details of the foundation investigations, so the engineering comes first, not after the plans are drawn. Here is how the engineering fits into a typical build:

  1. Before design

    Site classification

    Boreholes on your lot give it an AS 2870 class, from A (sand or rock) through S, M, H1, H2 and E (extremely reactive clay) to P (problem sites such as fill). We never assume a class from the suburb.

  2. With the plans

    Footing and slab design

    Drawings and calculations sized for that class, the house and any trees nearby. Where the Urban Tree Canopy Overlay applies, a new home needs at least one new tree, so we allow for where it will go.

  3. Approval

    Planning Consent and Building Rules Consent

    Lodged on PlanSA. Together they make the Development Approval your builder needs before starting.

  4. During the build

    Notifications and inspections

    The builder gives council one business day's notice before work starts and before any stage council names. Current policy is for councils to inspect 66% of new houses.

  5. At completion

    Statement of Compliance

    The builder signs Part A and the owner Part B, lodged with any certificates the consent lists. We supply the engineering certificates it asks for.

Our site classification and footing design starts from $1,200 + GST ($1,320 inc GST).

How big can a granny flat be in Onkaparinga?

Usually up to 70 m² of floor area, with walls no higher than 3 m and a roof no higher than 5 m. That is the Code's standard for ancillary accommodation (Design in Urban Areas, DTS/DPF 19.4), and it must sit on the same site as the main house. Zones vary, so check yours before you buy a kit or sign with a builder. Our granny flat rules guide sets out the steps, and granny flat engineering is fixed-quoted per project.

How were the old stone houses at Reynella and Aldinga built?

Mostly from local limestone and sandstone, often as random rubble laid in lime mortar. Old Reynella's Historic Area covers houses from the 1840s to the 1920s in limestone, coursed sandstone and random rubble; Aldinga's covers 1850s–1920s limestone and sandstone rubble, with Willunga slate.

A rubble wall is usually two faces of stone with a looser core between them. When the mortar weathers or the footing moves, the faces can separate and the wall bulges, which a structural assessment needs to catch before it gets worse. Salt damp adds to it at the base of the wall. We assess the structure, specify any stabilisation and give temporary support details if the wall is to be underset; the damp course belongs with a damp specialist. See bluestone and heritage homes.

Do Aldinga and Sellicks Beach lots have coastal rules?

Lots close to the sea do. A retaining wall on a lot within 100 m of the coast needs approval whatever its height, and a deck in the Coastal Areas Overlay needs approval even below 500 mm. On sloping blocks further back, a wall retaining more than 1 m needs approval anywhere, and so does a wall with a fence on top that is over 2.1 m from the low side. Engineering for a retaining wall is priced from $790 + GST ($869 inc GST).

What if my new house in Morphett Vale is cracking?

Get an independent report and raise it with the builder early. Hairline shrinkage cracks in a new house are common in the first year or two; cracks that widen, doors that start to stick and cracked tiles over a slab are worth an engineer's look. A building defect report records what is wrong, the likely cause and what a fair repair looks like, and it is fixed-quoted per job.

Building indemnity insurance is a builder's policy, needed for domestic work of $20,000 or more that requires approval. It is a last resort if the builder dies, disappears or becomes insolvent, covering defective work within the 5-year statutory warranty period. It does not cover engineering advice.

Service area

Suburbs we cover around Morphett Vale

Our site visits reach every part of the City of Onkaparinga, including Hackham, Woodcroft, Huntfield Heights, Noarlunga, Christies Beach, Seaford and McLaren Vale. Closer to the city, see structural engineer Glenelg.

  • Morphett Vale
  • Reynella
  • Aldinga
  • Sellicks Beach

Not sure we cover your street? Send the address and we'll confirm it in your fixed quote. Site visits across Greater Adelaide and the Adelaide Hills. Desktop reviews of photos and plans anywhere in South Australia.

Other areas

All areas we cover

FAQ

Structural engineer Morphett Vale: FAQs

Still unsure? Call 08 7083 9853 or send photos for a fixed quote.

How much is footing design for a new home in Morphett Vale?

Footing and slab design starts from $1,200 + GST ($1,320 inc GST), with the site classification arranged. A granny flat or an extension gets its own fixed price instead, in under 20 minutes on average, during business hours.

Can I build a granny flat in Morphett Vale?

Often, yes. The Code's usual limit for ancillary accommodation is 70 m² of floor area with walls up to 3 m high, but the zone decides, so check it first. We then design the footings, slab and frame.

Do you inspect old stone houses in Old Reynella?

Yes. Old Reynella's Historic Area has limestone, coursed sandstone and random rubble houses from the 1840s to the 1920s, and we assess their cracks, bulges and salt damage. Heritage work is fixed-quoted.

Does a new block at Sellicks Beach need a soil test?

Yes. Every new lot needs its own site classification before the footings are designed, whatever the lot next door showed. Much of Adelaide sits on highly reactive clay, so the class can change from one block to the next.

My new house has cracks. What should I do?

Get an independent defect report while the builder can still be asked to fix them. If the builder has died, disappeared or become insolvent, building indemnity insurance may cover defective work within the 5-year warranty period.

How far south do you visit?

Right across the City of Onkaparinga, including Aldinga and Sellicks Beach. South of that, we work from photos and plans.