Single-fronted bluestone villa with red-brick quoins, a bullnose verandah with cast-iron lacework, a low stone wall and an iron front fence

City of Unley · South Australia

Structural engineer in Unley

The City of Unley has more Historic Area Statements than any other council, and a lot of the work here starts at the back of an old villa. Extensions, new footings and drainage for Unley, Unley Park, Parkside and Goodwood, designed by engineers who don't build them.

  • 28Historic Area Statements, the most of any council
  • Under 20 minaverage time to a fixed quote
  • From $790+ GST for a drainage plan ($869 inc GST)
Quote requestMon–Fri 8am–5pm

Get a Unley quote

Photos or plans are usually enough to price the job.

We reply with a fixed quote in under 20 minutes on average, during business hours.

Engineering only
Fixed prices from $350 + GST
Quotes in under 20 min on average
NCC & Australian Standards

In short

In Unley, most structural engineering involves older villas: rear extensions, wall removals, new footings next to old ones and the drainage that goes with them. The council has 28 Historic Area Statements, the most in South Australia. Drainage plans start from $790 + GST ($869 inc GST) and beam designs from $790 + GST ($869 inc GST); extensions are fixed-quoted.

Structural engineer Unley: local facts

Council
City of Unley, with 28 Historic Area Statements in the Planning and Design Code, more than any other South Australian council
Typical homes
Sandstone, bluestone and brick houses built between 1900 and 1940, as described in the Unley Park (West) Historic Area Statement
Stormwater
Council's policy of December 2025, as published, sends stormwater to the kerb water table, not the footpath, at up to 20 L/s per connection
Footings
Much of Adelaide sits on highly reactive clay, so an extension's footing is designed from its own site classification

What does an engineer check before extending an Unley villa?

Three things: what the old walls and footings can carry, how the new footing will behave next to the old one, and where the extra roof water will go. Get those right on paper and the builder prices a known job instead of a guess.

  • The existing structure. Where the extension opens into the house, a wall usually comes out or gets a large new opening, so the beam, its posts and what they bear on need sizing. Old stone and brick walls sometimes need their own check before they take new load.
  • The ground. A site classification measures how much the clay under your lot moves. The new footing is designed for that class, and the classification goes with the application as the "details in writing of any foundation investigations" that a building consent requires.
  • The water. A bigger roof means more stormwater. Discharged badly, it ends up soaking the clay beside the footings you have just paid for.

We prepare the structural drawings and calculations for the certifier. Your builder or designer handles the rest of the application on PlanSA. Our extensions and renovations work is fixed-quoted, and footing design with site classification starts from $1,200 + GST ($1,320 inc GST).

Why do extensions crack where they meet the old house?

Because two different footings are sharing one wall line. An older villa often sits on shallow footings that have been in the ground for generations, while a new extension sits on a modern footing at a different depth. On reactive clay the two rise and fall by different amounts each season, and the junction cracks.

The answer is planned in at the design stage: an articulation joint that lets the two parts move independently, a footing design matched to the site class, and drainage that keeps both sides at a steady moisture level. If you already have a crack at the join, a cracks and footing movement report from $990 + GST ($1,089 inc GST) finds out whether it is still active before anyone patches it.

Where can stormwater from an Unley extension go?

To the kerb, on council's terms. As published in December 2025, the City of Unley's policy sends all stormwater to the kerb water table, or to the road surface where there is no kerb, never across the footpath. It caps each connection at 20 L/s and keeps groundwater out of the kerb. Policies change, so we check the current version for your design.

If the job is a new dwelling, for example after a subdivision, the Code's Stormwater Management Overlay can also set a rainwater tank by site size:

Site areaRetention tankDetention
Under 200 m²1,000 L1,000 L
200–400 m²2,000 L1,000 L if the site is less than 30% pervious
Over 401 m²4,000 L1,000 L if the site is less than 35% pervious

Planning and Design Code (v2026.19), Stormwater Management Overlay, DTS/DPF 1.1. Detention tanks drain through a 20–25 mm slow-release orifice. Check SAPPA to see whether the overlay applies to your lot.

A stormwater and drainage plan from $790 + GST ($869 inc GST) shows the downpipes, pits, any tank and the kerb outlet, with falls your plumber can build to.

How do Unley's Historic Area Statements affect an extension?

They shape what the extension looks like from the street more than how it is built. With 28 statements across the council, there is a fair chance your street has one, and SAPPA will show it. Planning assessment refers to the statement for the era, materials and features that give the area its character, and your designer works to it.

The engineering doesn't change because of the statement, but the existing house does constrain it: stone or brick walls that must stay, a front room that can't be propped from outside, a verandah that has to be kept. We design around what the planning approval asks you to keep. For the stone itself, see bluestone and heritage homes.

Service area

Suburbs we cover around Unley

We visit the whole City of Unley, including Hyde Park, Malvern, Millswood and Wayville. East of Unley, see structural engineer Norwood and Burnside.

  • Unley
  • Unley Park
  • Parkside
  • Goodwood

Not sure we cover your street? Send the address and we'll confirm it in your fixed quote. Site visits across Greater Adelaide and the Adelaide Hills. Desktop reviews of photos and plans anywhere in South Australia.

Other areas

All areas we cover

FAQ

Structural engineer Unley: FAQs

Still unsure? Call 08 7083 9853 or send photos for a fixed quote.

What do structural engineers charge in Unley?

Most Unley jobs sit between a $350 + GST desktop review and a $990 + GST structural report. Drainage plans start at $790 + GST ($869 inc GST) and beam designs at $790 + GST, while an extension is quoted as a fixed fee for the whole design.

Can I run stormwater to the street in Unley?

Yes, to the kerb water table through a council-approved connection, never onto the footpath. Unley's December 2025 policy, as published, limits each connection to 20 L/s; check the current version with council before you build.

Do I need a soil test for an Unley extension?

Usually, yes. A building consent application has to include details of any foundation investigations, and the footing design depends on the site class. We arrange the site classification with the footing design, from $1,200 + GST ($1,320 inc GST).

Why has a crack opened where my extension joins the house?

Usually because the old and new footings sit at different depths and move differently as the clay wets and dries. A crack report (from $990 + GST ($1,089 inc GST)) works out whether it is still moving and what to do about it.

How many Historic Area Statements does Unley have?

28, more than any other council in the Planning and Design Code. Unley Park (West), for example, covers sandstone, bluestone and brick houses from 1900 to 1940, and SAPPA shows whether your street is in one.

Can I open up the back of my Unley villa?

Usually, with a beam designed for what the wall carries and with Building Rules Consent, because removing a load-bearing wall is not exempt. Our beam design starts from $790 + GST ($869 inc GST).