Areas we cover
Structural engineers across Greater Adelaide
Site visits across Adelaide's 19 metropolitan councils, from Gawler to Sellicks Beach and Semaphore to the Hills, plus the Mount Barker district. Desktop reviews, design and certification from photos and plans anywhere in South Australia.

In short
Adelaide Structures visits sites across Greater Adelaide's 19 metropolitan councils, from Gawler to Sellicks Beach and from Semaphore to the Adelaide Hills, plus the Mount Barker district. Anywhere else in South Australia, we review, design and certify from photos and plans. Fees start from $350 + GST, with a fixed quote in under 20 minutes on average, during business hours.
- Site visits
- 19 metropolitan councils and Mount Barker
- Desktop services
- Anywhere in South Australia, from photos and plans
- Quote
- Fixed, in under 20 min on average (Mon–Fri 8am–5pm)
By region
Which suburbs does a structural engineer in Adelaide cover?
All of Greater Adelaide and the Hills. Each local page below has that area's council, heritage and ground facts, and the suburbs listed under it are covered too. Not listed? Send the address and your quote confirms it.
East and inner ring
Also: Adelaide city, Kent Town, Stepney, Payneham, Marden, Hyde Park, Malvern, Wayville, Tusmore, Linden Park, Kensington Park, Gilberton, Fitzroy, Magill and Campbelltown.
West and the beaches
Also: Semaphore, Largs Bay, Birkenhead, Grange, West Beach, Fulham Gardens, West Lakes, Seaton, Bowden, Hindmarsh, Mile End, Torrensville and Enfield.
South
Also: Brighton, Somerton Park, Glenelg North, Hove, Seacliff, Marion, Hallett Cove, Reynella, Woodcroft, Christies Beach, Seaford, McLaren Vale, Aldinga and Sellicks Beach.
North
Also: Mawson Lakes, Paralowie, Elizabeth Park, Davoren Park, Smithfield, Munno Para, Tea Tree Gully, Ridgehaven, Golden Grove, Willaston and Evanston.
Adelaide Hills
Also: Stirling, Crafers, Aldgate, Bridgewater, Woodside, Lobethal, Belair, Eden Hills, Coromandel Valley, Hahndorf, Littlehampton and Nairne.
Rest of South Australia
The Riverland, the Limestone Coast, Eyre and Yorke Peninsulas, the Mid North and any other part of the state, from photos and plans.
By council
What changes from council to council?
The rules themselves are state-wide: the PDI Act, the Planning and Design Code and the Building Code (NCC 2022 as amended until 30 April 2027, then NCC 2025). What changes is local: the Historic Area Statements, overlays on each lot and each council's own policies.
| Council | Worth knowing before you build | Local pages |
|---|---|---|
| City of Adelaide | 14 Historic Area Statements, including North Adelaide Hill Street. The council publishes heritage specifications for damp-proof injection, salt damp management and undersetting. | North Adelaide |
| Adelaide Hills Council | All land must meet bushfire construction requirements, and new homes and habitable additions in the High Risk overlay are referred to the CFS. 3 Historic Area Statements. | Adelaide Hills |
| City of Burnside | 10 Historic Area Statements, including Rose Park (1880–1940 bluestone, freestone and sandstone). The Burnside Fault is on Master Builders SA's list of Adelaide faults. | Burnside |
| Campbelltown City Council | Character Area Statements apply in parts of the council, with different rules from the Historic Area Overlay. | Norwood, Modbury |
| City of Charles Sturt | 23 Historic Area Statements, the third most of any council, including Henley Beach and Woodville. | Henley Beach, Woodville |
| Town of Gawler | 9 Historic Area Statements. Gawler East (1850–1940) has sandstone or limestone villas and cottages with red brick quoins. | Gawler |
| City of Holdfast Bay | 4 Historic Area Statements. A stormwater connection to the kerb needs council approval through its "221" form ($80). | Glenelg |
| City of Marion | 1 Historic Area Statement, plus Character Area Statements. | Glenelg, Blackwood |
| City of Mitcham | 4 Historic Area Statements, including Belair Village. CFS referral is needed only in high bushfire prone areas. | Blackwood |
| City of Norwood Payneham & St Peters | 26 Historic Area Statements. A Heathpool Historic Area and 20 inter-war Local Heritage Places were added in October 2025. | Norwood |
| City of Onkaparinga | 7 Historic Area Statements, including Old Reynella and Aldinga. The Sellicks Beach Growth Area entered the Code in February 2026. | Morphett Vale |
| City of Playford | 1 Historic Area Statement. Elizabeth was planned by the Housing Trust and developed from 1955. | Elizabeth |
| City of Port Adelaide Enfield | 7 Historic Area Statements, including Semaphore/Largs. Acid sulfate soils have been identified around Port Adelaide and Gillman. | Port Adelaide |
| City of Prospect | 11 Historic Area Statements. Highbury is an 1882 subdivision with stone walls. | North Adelaide |
| City of Salisbury | Approval is needed where a retaining wall plus fence is over 2.1 m, with the engineer's footing calculations. | Salisbury |
| City of Tea Tree Gully | 1 Historic Area Statement (Tea Tree Gully Township). A 2016 soil study at Modbury North looked at reactive clay and buried clay-filled valleys. | Modbury |
| City of Unley | 28 Historic Area Statements, the most of any council. | Unley |
| Town of Walkerville | 5 Historic Area Statements. Medindie houses are mostly built of locally sourced sandstone or bluestone. | North Adelaide |
| City of West Torrens | 6 Historic Area Statements, including Mile End (1860s–1920s villas in stone and brick). | Woodville, Glenelg |
| Mount Barker District Council | Outside the 19 metropolitan councils but inside Greater Adelaide planning. 19 Historic Area Statements, including Hahndorf; about 1,300 ha rezoned for growth in 2010. | Mount Barker |
Planning and Design Code (v2026.19), council policies and fact sheets. Where a council has no page of its own, the nearest local page is listed. Check SAPPA for the heritage, coastal, flooding and bushfire overlays on your lot.
Historic Area Statements by council
Overlays change what is exempt
Low decks, low retaining walls, fences and open pergolas are usually not development in South Australia, but a coastal, heritage, flooding or bushfire overlay can remove those exemptions. Within 100 m of the coast, for example, even a low retaining wall needs approval. We don't prepare BAL assessments. Our guide to building approvals in SA explains the rest.
Site visit or desktop
Do you need a site visit, or can it be done from photos and plans?
Many jobs can be quoted, and some finished, from photos and plans. Inspections, dilapidation records and anything that needs the ground tested need a visit, which we make across Greater Adelaide and the Hills.
| Service | Greater Adelaide and the Hills | Rest of South Australia |
|---|---|---|
| Structural inspection, crack and pre-purchase reports | Site visit and report, from $990 + GST | Desktop review of your photos and existing reports, from $350 + GST |
| Underpinning or repair quote second opinion | From the quote, photos and any reports, with a visit if needed | From the quote, photos and any reports |
| Wall removal, retaining walls, verandahs and decks, pools | Designed from plans and photos, with a site visit where needed | Designed from plans, photos and a survey |
| Site classification and footings | Site classification arranged, then footing design | Footing design from an existing site classification |
| Stormwater and drainage plans | Designed from the site plan and levels | Designed from the site plan and levels |
| Dilapidation reports | Site visit before the neighbouring work starts | Needs a visit, so only inside our visit area |
| Engineer's certificates and independent certification | Inspection of the built work, or certification of calculations | Independent certification of calculations from the documents; certificates for built work depend on the evidence |
| Commercial projects | Design, documentation and inspections | Design and documentation from plans |
Your fixed quote confirms whether the job needs a site visit. All work is engineering only: we never sell or carry out repairs.
South Australia-wide
Can you help outside Greater Adelaide?
Yes, from photos and plans. A lot of engineering doesn't need us standing in the room: checking a repair quote, designing a beam from measured drawings, or certifying a designer's calculations.
Second opinions
Send the underpinning, resin injection or repair quote with photos. We tell you whether the work is needed, from $350 + GST ($385 inc GST).
Design from drawings
Beams, footings, retaining walls and verandahs designed from your plans, survey and site classification, with drawings your builder can use.
Independent certification
A Building Level 2 or Level 3 certifier can only grant consent once the structural calculations are certified by an independent technical expert (PDI Regulations, reg 25(5) and (7)). We do that from $390 + GST ($429 inc GST).
Anywhere in South Australia
Send your suburb and a few photos
You'll have a fixed quote in under 20 minutes on average, during business hours, saying whether a site visit is needed.
Which areas do you visit?
We visit sites across Adelaide's 19 metropolitan councils, including the Adelaide Hills Council and the Town of Gawler, plus the Mount Barker district. Not sure about your street? Send the address and your quote confirms it.
Can you help if I'm outside Adelaide?
Yes. Anywhere in South Australia we provide desktop reviews, design and certification from photos and plans, from $350 + GST. Your quote says whether the job can be done that way.
Do building rules change from council to council?
The state rules are the same everywhere: the PDI Act, the Planning and Design Code and the Building Code. What changes is the overlays on your lot, the Historic Area Statements for your street and each council's own policies, such as kerb connections.
Which council has the most Historic Area Statements?
The City of Unley, with 28, followed by Norwood Payneham & St Peters with 26 and Charles Sturt with 23 (Planning and Design Code, version 2026.19).
Do you do bushfire (BAL) assessments in the Hills?
No, BAL assessments are not part of our service. Where a bushfire overlay applies, the BAL comes from a separate assessment, and our structural design works with it.
How fast will I get a quote?
In under 20 minutes on average, during business hours (Mon–Fri 8:00am–5:00pm), once you send the address and a few photos or plans. The quote is a fixed price and says whether a site visit is needed.