
Homeowners · Builders · Designers
Engineering for house extensions and second storeys
An extension or second storey needs footings that suit your site, a frame and beams that carry the new loads, and calculations your certifier can approve. We engineer the structure; your designer and builder do the rest.
- Fixed quoteper project, before we start
- Under 20 minaverage time to a fixed quote
- Engineering onlywe don't build, so any builder can price it
In short
A house extension or second storey in Adelaide needs development approval through PlanSA, and the Building Rules Consent application must include footing and structural drawings, calculations and details of the foundation investigation. We classify the site, design the footings, frame and beams, and check existing footings before a second storey. Every project gets a fixed quote, sent in under 20 minutes on average, during business hours.
- Fee
- Fixed quote per project, agreed before we start
- We need
- Concept or draft plans, the address and photos of the house
- You receive
- Footing and structural design, drawings and calculations
Overview
What structural engineering does a house extension need?
A house extension needs a site classification, a footing design to suit it, and a design for every structural part the builder can't take from standard tables: beams over openings, a steel frame, a second-storey floor, bracing and tie-down. In South Australia the Building Rules Consent application must include footing and structural drawings at 1:200, specifications, calculations or reports, and details in writing of any foundation investigation.
- Site classification to AS 2870, arranged by us, so the footings suit your ground
- Footing or slab design for the new part, with the joint to the existing house detailed
- Beams and lintels where walls come out or openings widen into the new rooms
- Floor, frame and roof checks for a second storey, including the existing walls and footings
- Bracing and tie-down against wind, with Adelaide's earthquake hazard, the highest of the capital cities, part of our design checks
- Inspections and certificates at the stages your consent lists
We design to the Building Code your certifier assesses against: NCC 2022 (as amended) applies in South Australia until 30 April 2027, and the NCC 2025 Building Code from 1 May 2027.
Key takeaways
- New footings need a site class. On Adelaide's reactive clay, never assume one.
- A second storey starts with the footings and walls you already have.
- Old and new parts of the house move differently, so the join is designed, not left to chance.
- Your builder signs Part A of the Statement of Compliance; you sign Part B.
Bring us in early
Ask for engineering once the layout is roughly settled. The beam sizes, footing depths and any steel affect what the builder quotes, so early drawings mean fewer surprises in the price.
Approvals in SA
Who does what on an extension in South Australia?
Four people share the job: a designer draws it, the engineer designs the structure, a council or accredited professional grants consent, and a licensed builder builds it. Planning Consent and Building Rules Consent together make up Development Approval, lodged on PlanSA.
Designer or architect
Plans the layout and look and prepares the architectural drawings for Planning Consent.
Structural engineer
Arranges the site classification and designs footings, frames, beams and bracing, with calculations.
Council or certifier
Checks the design against the Building Code and grants Building Rules Consent.
Licensed builder
Builds from the drawings, gives the council notice at the required stages and signs Part A of the Statement of Compliance.
Three SA rules worth knowing
Building indemnity insurance. Your builder needs it for domestic work of $20,000 or more that needs approval, with $250,000 cover. It's the builder's policy, not cover for engineering advice.
Digging near the boundary. If the excavation for footings cuts through a plane sloping down at 1 vertical to 2 horizontal from 600 mm below natural ground at the boundary, the neighbour must be served a notice at least 20 business days before work starts (PDI Act section 139). See neighbour excavation.
Trees. The consent site plan shows any regulated tree on your land or next door, and roots near new footings on clay affect the design.
Independent certification of calculations
Building Level 2 and Level 3 certifiers can only grant consent once the structural calculations are certified by an independent technical expert who had no part in the design. If someone else engineered your extension, we can certify their calculations, from $390 + GST ($429 inc GST). We can't design and independently certify the same job.
Our guide to building approvals in SA explains Planning Consent, Building Rules Consent and what's exempt.
Second storeys
Can my house take a second storey?
Often it can, but only after the existing footings and walls are checked, because they were designed to carry one storey. A second storey adds floor, wall and roof loads that come down through the walls below, so the first job is to find out what those walls stand on.
Adelaide houses are mostly solid masonry on dwarf wall footings or raft slabs. We check the footing type and size, sometimes with a test hole beside a footing, look for past movement such as cracks, and confirm the site class. Then there are three common answers:
- The house takes it as is, with the new loads brought down onto walls and footings that can carry them
- Some parts need strengthening, such as new footings under the walls that carry the most load
- A separate frame carries the new storey, usually steel columns on their own footings, so the old walls carry little extra
Existing cracks matter before you build up. If the walls already show movement, a crack and footing report first tells you why, so the new storey isn't sitting on a problem.

| We check | Why it matters |
|---|---|
| Footing type, depth and width | Sets how much extra load the walls can take |
| Site class | Reactive clay moves seasonally, and heavier walls feel it |
| Wall condition and cracks | Past movement has to be understood before adding load |
| Roof and ceiling framing | Shows where the new floor can bear and what comes out |
Renovations
Which renovations need a structural engineer?
Any renovation that changes how the house carries its load needs an engineer: removing walls, cutting openings, adding weight, changing the roof or adding a structure outside.
Open-plan living
Removing or shortening a load-bearing wall needs a beam, posts, footings and approval. See wall removal and beam design.
New openings
Wider doorways, bifolds and big windows need lintels or beams, especially in brick, bluestone and sandstone walls.
Heavier finishes
A tiled bathroom, stone benchtops or a large bath on an old timber floor can need the joists and bearers checked.
Roof changes
Skylights that cut rafters, a heavier roof covering, raised ceilings or solar panels on old framing.
Granny flats and studios
A soil test, a slab or footings, the frame and tie-down. See granny flat engineering.
Outdoor additions
A verandah, deck or carport off the new rooms. See verandahs, pergolas, carports and decks.
Extending a heritage or stone home?
Unley has 28 Historic Area Statements, the most of any council, and Norwood Payneham & St Peters has 26. Your designer works to the statement for your area at Planning Consent; we make sure the new structure and the old masonry work together. See bluestone and heritage homes and our pages for Unley and Norwood.
How it works
How is extension engineering priced and delivered?
Extension engineering is priced by fixed quote per project, agreed before anything starts, and delivered as drawings and calculations ready to lodge with your Building Rules Consent application.
- Step 1
Send your plans
Concept or draft drawings, the address and photos of the house, through the form on this page or the quote page.
- Under 20 min on average
Get a fixed quote
It lists the site classification, any visit to check existing footings, the drawings and any stage inspections.
- Before design
Site class and existing footings
We arrange the soil test and, for a second storey, check what the house stands on.
- On the date in your quote
Drawings and calculations
Footings, frame, beams and bracing, ready for your designer to lodge with the application.
- During the build
Inspections and certificates
At the stages your consent lists, so the builder can lodge them with the Statement of Compliance.
Extension and renovation engineering
Priced for your house and plans once we've seen them, and fixed before anything starts. No hourly rates, no surprises.
- Site classification arranged
- Footing, frame, beam and bracing design
- Drawings and calculations for Building Rules Consent
- Existing footings checked for second storeys
- Site visits across Greater Adelaide and the Adelaide Hills
Related services
Often needed alongside an extension

Wall removal & beam design
Load-bearing wall removal designed properly: the beam, posts and footings, with drawings and calculations for your builder and certifier.
from$790+ GST$869 inc GSTLearn more
Site classification & footings
AS 2870 site classification and footing or slab design for new homes, extensions and granny flats on Adelaide's reactive clay.
from$1,200+ GST$1,320 inc GSTLearn more
Engineer's certificates
Engineer's letters, structural adequacy reports and independent certification of structural calculations, ready for your council or building certifier.
from$390+ GST$429 inc GSTLearn moreDo I need a structural engineer for an extension?
Usually, yes. A Building Rules Consent application in SA needs footing and structural drawings, calculations and details of the foundation investigation, and on reactive clay the footings must suit your site's class. Your certifier confirms what a very small addition needs.
How much does a structural engineer cost for a house extension in Adelaide?
Extensions are priced by fixed quote per project, because the size, the number of storeys, the soil and the existing house all vary. Send your plans for a fixed quote in under 20 minutes on average, during business hours; it lists what's included, such as the site classification and any inspections.
Can my house take a second storey?
Often, but the existing footings and walls are checked first. Footings under a single-storey house were sized for one storey, so we confirm what's there, sometimes with a test hole beside a footing, before the design goes ahead.
Do I need a soil test for an extension?
Usually, if there are new footings or a slab. The consent application needs details of the foundation investigation. Much of Adelaide sits on highly reactive clay; every site needs its own classification. See site classification and footings.
Who signs the Statement of Compliance for an extension?
Your builder signs Part A and you, the owner, sign Part B. It is lodged at completion with any certificates or reports your consent lists, and we supply the engineering certificates or inspection reports it asks for.
Does my builder need building indemnity insurance?
Yes, for domestic building work of $20,000 or more that needs approval (since 10 November 2025), with $250,000 cover. It is the builder's policy and does not cover engineering advice.
Can you independently certify calculations for my certifier?
Yes, if we weren't involved in the design. Building Level 2 and Level 3 certifiers can only grant consent once the structural calculations are certified by an independent technical expert. Independent certification starts from $390 + GST ($429 inc GST).
Do you build extensions?
No. We are engineering only. We design and document the structure, any builder can price and build from our drawings, and we never recommend a builder.