Stone cottage and a weatherboard house among tall gum trees on a winding road in the misty Adelaide Hills

Adelaide Hills Council · South Australia

Structural engineer in the Adelaide Hills

Steep blocks, tall gums, 1880s stone villas and bushfire construction rules on every property. We engineer retaining walls, decks, pools, footings and drainage across Stirling, Crafers, Aldgate and the rest of the Adelaide Hills Council area.

  • All landmust meet bushfire construction rules
  • Under 20 minaverage time to a fixed quote
  • From $490+ GST for deck and verandah engineering
Quote requestMon–Fri 8am–5pm

Get a Adelaide Hills quote

Photos or plans are usually enough to price the job.

We reply with a fixed quote in under 20 minutes on average, during business hours.

Engineering only
Fixed prices from $350 + GST
Quotes in under 20 min on average
NCC & Australian Standards

In short

Every property in the Adelaide Hills Council area must meet bushfire construction requirements, and new homes or habitable additions in the High Risk bushfire overlay are referred to the CFS. A structural engineer designs the walls, decks, footings and drainage a steep Hills block needs within those rules. Deck and verandah engineering starts at $490 + GST ($539 inc GST), retaining walls at $790 + GST ($869 inc GST).

Structural engineer Adelaide Hills: local facts

Council
Adelaide Hills Council
Bushfire
All land in the council area must meet bushfire construction requirements. New homes and habitable additions in the High Risk overlay go to the CFS (allow about 6 weeks)
BAL
Council can't provide a BAL. A bushfire practitioner assesses it, and we design the structure to suit
Historic Areas
3 Historic Area Statements, including Stirling-Ayres Hill Road for 1880s stone villas
Pool inspections
The whole council area counts as metropolitan, so council inspects pool safety features within 10 business days

How do bushfire rules shape structural work in the Hills?

They set the construction standard before any engineering starts. Adelaide Hills Council requires all land in its area to meet bushfire construction requirements, Ministerial Building Standard MBS 008 adds extra requirements in bushfire prone areas, and a new home or habitable addition in the Hazards (Bushfire - High Risk) Overlay is referred to the CFS, which can direct conditions. Allow about 6 weeks for that referral in your program.

The bushfire attack level (BAL) then drives construction details such as materials. Council can't provide a BAL; in medium-risk areas it suggests assuming BAL 12.5 as a guide only. We don't assess BAL. A bushfire practitioner does that, and we design the framing, decks, verandahs and walls to the level they set, so the structure and the bushfire details agree on paper and on site. The council's bushfire requirements page sets out its process.

Which Hills rules differ from the Adelaide plains?

Several exemptions that save an approval on the plains don't apply in bushfire areas or the special Hills zones, and one allowance is more generous.

WorkUsual rule elsewhereIn the Adelaide Hills
Low deck (up to 500 mm high, 900 mm or more from a boundary)Not developmentNot exempt in a bushfire prone area, the Hills Face Zone or the Significant Landscape Protection Overlay
Fence up to 2.1 mNot developmentNot exempt in the Hills Face Zone or the Significant Landscape Protection Overlay
Small pool, 300 mm deep or less, no filterNot developmentNot exempt in the Hills Face Zone
Above-ground water tankExempt up to 10 m² and 40,000 LExempt up to 15 m² and 60,000 L in bushfire overlays
New home or habitable additionCouncil or a building certifierAlso referred to the CFS in the High Risk overlay
Council pool safety inspection10 business days in Metropolitan Adelaide, 15 elsewhere10 business days across the whole council area

PDI Regulations Schedule 4, Adelaide Hills Council's bushfire guidance and Practice Direction 8 (2025). Check your property's zone and overlays on SAPPA; your certifier confirms what applies.

Deck, verandah and carport engineering starts at $490 + GST ($539 inc GST): see verandahs, pergolas, carports and decks. A pool on a Hills slope is partly a retaining structure on its high side; pool engineering starts at $890 + GST ($979 inc GST).

What does a steep Hills block need from an engineer?

Walls designed for the full height of ground they hold, footings that reach firm ground on the slope, and drainage that takes water around the house rather than into the cut behind it.

Sandstone block wall above a concrete sleeper retaining wall in front of a modern house, with Adelaide Hills slopes behind
Figure 1Stacked walls like these count as one height for approval: the total difference in ground levels.

A retaining wall that holds back more than 1 m of ground needs approval, and tiered walls count the overall difference. A cut near a boundary may oblige you to give the neighbour a section 139 notice, and every building in South Australia must be designed on the assumption that the neighbour may one day excavate to a 1-in-2 plane from the boundary. New footings start with a site classification: footing design is from $1,200 + GST ($1,320 inc GST).

Water is the other half of a slope. A stormwater plan, from $790 + GST ($869 inc GST), shows where runoff from the high side and the roof goes, and the stormwater rules guide covers tanks and detention. The Crafers Fault is on Master Builders SA's list of faults around Adelaide; Adelaide's earthquake hazard is the highest of the capital cities and is part of our design checks.

Do 1880s stone villas in Stirling need different engineering?

They need an engineer who reads old stone and lime mortar rather than modern brick. The Stirling-Ayres Hill Road Historic Area Statement covers 1880s stone villas, and alterations to them, or a case to demolish one, lean on a careful structural condition assessment.

Damp-proof course work in those walls is a damp specialist's job. We assess the structure: cracks, bulging or decayed stone, lintels over openings and temporary support during undersetting. Older timber-framed houses, decks and pools on fall get the same independent approach, because we don't sell or carry out repairs. See bluestone and heritage homes, priced as a fixed quote.

Service area

Suburbs we cover around Adelaide Hills

We visit properties across the Adelaide Hills Council area. For Hahndorf, Littlehampton and Nairne, see structural engineer Mount Barker; for Belair and Eden Hills, see Blackwood.

  • Stirling
  • Crafers
  • Aldgate
  • Bridgewater
  • Heathfield
  • Woodside

Not sure we cover your street? Send the address and we'll confirm it in your fixed quote. Site visits across Greater Adelaide and the Adelaide Hills. Desktop reviews of photos and plans anywhere in South Australia.

Other areas

All areas we cover

FAQ

Structural engineer Adelaide Hills: FAQs

Still unsure? Call 08 7083 9853 or send photos for a fixed quote.

Do you do BAL assessments in the Adelaide Hills?

No. A bushfire practitioner assesses the BAL, and Adelaide Hills Council can't provide one. Once it's set, we design the decks, verandahs, walls and framing to suit.

Is a low deck in Stirling or Aldgate ever exempt?

Rarely. The exemption for low decks doesn't apply in bushfire prone areas, and all land in the Adelaide Hills Council area must meet bushfire construction requirements. Deck engineering starts at $490 + GST ($539 inc GST).

Will my new home in the Hills go to the CFS?

If the site is in the Hazards (Bushfire - High Risk) Overlay, yes: new homes and habitable additions are referred to the CFS, which can set conditions. Allow about 6 weeks. Elsewhere in the council area the bushfire construction rules still apply.

What does a Hills retaining wall cost to engineer?

Retaining wall design starts at $790 + GST ($869 inc GST). Walls retaining more than 1 m, counting all tiers together, need approval, and your fixed quote lists the site visit and everything else included.

Is earthquake design part of a Hills project?

Yes. Adelaide's earthquake hazard is the highest of the capital cities and is part of our design checks. The Crafers Fault is one of the faults Master Builders SA lists around Adelaide.

How far into the Hills do your site visits go?

Across the whole Adelaide Hills Council area, from Stirling, Crafers and Aldgate outwards. Desktop reviews of photos and plans cover anywhere in South Australia.