Hand auger packed with dark grey clay beside a borehole in cracked dry ground, with two soil sample bags, a field notebook and a brick house behind

Homeowners · Builders · Designers

Soil tests, site classification and footings

Before a new house, extension or granny flat goes ahead, the ground under it needs an AS 2870 site class. We arrange the soil test and site classification, then design footings or a slab to suit, ready for your Building Rules Consent.

  • From $1,200+ GST ($1,320 inc GST)
  • Under 20 minaverage time to a fixed quote
  • AS 2870site classes A, S, M, H1, H2, E and P
Quote requestMon–Fri 8am–5pm

Get a fixed quote for your footing design

Send the address, a site plan and what you plan to build. Add any earlier soil report for the lot.

We reply with a fixed quote in under 20 minutes on average, during business hours.

Engineering only
Footing designs from $1,200 + GST
Quotes in under 20 min on average
NCC & Australian Standards

In short

A soil test, or site classification, measures how much the ground can shrink and swell and gives it an AS 2870 class: A, S, M, H1, H2, E or P. Footings are then designed for that class. Much of Adelaide sits on highly reactive clay; every site needs its own classification. Our footing and slab designs start from $1,200 + GST ($1,320 inc GST), with the site classification arranged.

Fee
From $1,200 + GST ($1,320 inc GST)
Site classes
A, S, M, H1, H2, E or P under AS 2870
You receive
Site classification, footing or slab design, drawings and calculations

Overview

What is a soil test and site classification?

A soil test for building is a site investigation that finds out what the footings will sit on, and a site classification turns the result into an AS 2870 class. AS 2870 Residential slabs and footings sorts sites by how far the ground surface can rise and fall as clay wets and dries, called the characteristic surface movement.

On site, boreholes are drilled by hand auger or a drill rig where the building will stand. Each one is logged: soil type, colour, moisture, strength, any fill, rock or groundwater. Where the clay's reactivity needs measuring, samples go to a laboratory for shrink-swell testing. The site is then classified and the footings designed to suit.

In South Australia the Building Rules Consent application has to include details in writing of any foundation investigation, alongside the footing and structural drawings and calculations. The site classification report is that document.

When you need one

  • A new house, townhouse, granny flat or garage on a slab or footings
  • An extension with new footings, or a second storey on existing ones
  • A verandah, carport or deck where your certifier wants the footings designed
  • Repairs to a house that has moved, where the cause has to be understood first

Key takeaways

  • A site class comes from boreholes and testing, never from the suburb name.
  • Classes run from A (little or no movement) to E (more than 75 mm), plus P for problem sites.
  • Trees, leaks and fill can make any site a problem site.
  • Your consent application needs the foundation investigation in writing.
6.5%of SA houses have major cracks in ceilings or floors, the highest share of any state (ABS 2019–20)
3.8 mmodelled depth of moisture change in uncracked clay on one Adelaide site (Adelaide University, 2026)
5–40 mmwidth of cracks in the clay on that site, up to 1 m deep and deepest in March and April

AS 2870 site classes

What do the AS 2870 site classes mean?

Each site class describes how much the ground surface can move as the soil moisture changes. The higher the class, the stiffer and deeper the footings need to be.

ClassGroundSurface movement (ys)What it means for footings
ALittle or no ground movement from moisture changes: most sand and rock sitesLittle or noneFootings sized for strength rather than ground movement
SSlightly reactive clay0–20 mmLighter slab beams and strip footings
MModerately reactive clay20–40 mmStiffer slab beams and more care with drainage
H1Highly reactive clay40–60 mmDeeper, stiffer beams; masonry walls need articulation
H2Highly reactive clay60–75 mmAs for H1, with stiffer footings again
EExtremely reactive clayMore than 75 mmA very stiff slab, or piers to more stable ground
PProblem site: soft soils, uncontrolled fill, trees or abnormal moistureNot classed by movementAn engineer's design for the specific problem

Site classes and movement ranges from AS 2870-2011. Footing notes are general engineering practice; your design follows the class and conditions found on your site.

How is the class worked out?

The class comes from the borehole logs, the clay's measured or estimated shrink-swell behaviour, and the depth over which soil moisture changes in the local climate. Together they give the characteristic surface movement, which sets the class from S to E.

Class P overrides the movement bands. Uncontrolled fill, soft ground, large trees nearby or abnormal moisture, such as a leaking pipe, make a problem site, and its footings are designed for that condition rather than taken from standard details.

A higher class doesn't mean you can't build. It means the footings are designed for more movement, and drainage around the building matters more for its whole life.

Characteristic surface movement by site class

  • Class S0–20 mm
  • Class M20–40 mm
  • Class H140–60 mm
  • Class H260–75 mm
  • Class Eover 75 mm
0 mm20 mm40 mm60 mm80 mm100 mm
Figure 1The reactive site classes of AS 2870-2011. Class E is open-ended above 75 mm. Classes A and P are not movement bands.Source: AS 2870-2011 Residential slabs and footings

Adelaide's ground

What is Adelaide's ground like for building?

Much of Adelaide sits on highly reactive clay, and every site needs its own classification. The research behind that is solid, and it also shows why a map can't replace a test.

01

Reactive clays

A 1996 MESA and CSIRO study of 170 cored holes found black earths and smectite-rich clays the most reactive, and black earth soils only half as reactive as the Keswick Clay beneath them.

02

Movement runs deep

The same study found deeper clays "equally reactive" and behind many cracks and footing failures. Adelaide University's 2026 modelling put moisture change at about 3.8 m, and up to 7 m where the clay cracks.

03

Gilgai, trees and leaks

Footing problems are linked to gilgai (natural mounds and hollows in clay), trees, changes to the site and leaking service pipes, which can make the clay heave.

04

No suburb map

A 2016 study on the state's SARIG geoscience database found that soil mapping alone cannot capture the full shrink-swell potential. There's no official map of site classes by suburb.

Street of new brick and rendered single-storey homes with young street trees and a footpath, with green rolling hills behind
Figure 2Neighbouring lots on a new estate can still classify differently. Each one gets its own boreholes.

Trees near new footings

Tree roots draw moisture out of clay, so trees are part of every classification. On the consent site plan, any regulated tree on your land or next door has to be shown. Trees within 3 m of a house are generally exempt from the tree rules, but never eucalypts, Corymbia, Angophora or willow myrtle.

New homes bring new trees too. Where the Code's Urban Tree Canopy Overlay applies, it asks for at least one tree per new dwelling, and more on bigger sites, often close to new footings. We take planned planting into account.

Our guide to reactive clay soils in Adelaide explains why houses on clay crack and how to look after the ground around your footings. If your house has already moved, start with a crack and footing report.

Footing design

Which footings or slab will my site need?

The right footing depends on the site class, the slope, the depth to firm ground and what you're building. These are the types we design most often for Adelaide homes.

Stiffened raft slabs

Concrete slabs with deepened edge and internal beams, sized to the site class and the walls they carry.

Waffle slabs

A grid of shallow ribs formed on the ground. They suit flatter sites in the lower classes.

Strip and dwarf wall footings

Under masonry walls, timber floors and extensions to older houses, many of which already stand on them.

Bored piers and screw piles

To carry loads down through deep reactive clay or fill to more stable ground, often on Class E and P sites.

Pad footings

Under posts carrying beams, verandahs, carports and decks. See verandahs, pergolas, carports and decks.

Footings for extensions

New footings matched to the existing house so old and new move together, or jointed so they can move apart without cracking.

Two design checks that are specific to SA

Footings near a boundary are designed on the assumption that a neighbour may one day excavate down to a plane sloping at 1 vertical to 2 horizontal from 600 mm below natural ground at the boundary (PDI General Regulations, regulation 64). And Adelaide's earthquake hazard is the highest of the capital cities and is part of our design checks.

How it works

How does a site classification and footing design work?

It takes five steps from your address and plans to footing drawings, with the price fixed before anything starts.

  1. Step 1

    Send the address and plans

    A site plan showing where the building goes, and any earlier soil report, through the form on this page or the quote page.

  2. Under 20 min on average

    Get a fixed quote

    It covers the soil test, the classification and the footing or slab design.

  3. On site

    Boreholes drilled and logged

    We arrange the soil test where the building will stand, with laboratory tests where needed.

  4. On the date in your quote

    Site classification

    The AS 2870 class and the soil profile, in writing for your consent application.

  5. Then

    Footing or slab design

    Drawings and calculations your builder can price and your certifier can approve.

Fixed fee, agreed first

Footing or slab design, site classification arranged

$1,200+ GST · $1,320 inc GST · starting price

A typical house, extension or granny flat in Greater Adelaide. Larger buildings, steep sites and Class P sites are priced in your fixed quote.

Do

  • Peg the corners of the planned building
  • Locate underground services before anyone drills
  • Tell us about old fill, removed trees or leaks

Don't

  • Assume your neighbour's class applies to you
  • Cut or fill the platform without telling us
  • Order a footing design before the class is known

FAQ

Soil test and footing design FAQs

Still unsure? Call 08 7083 9853 or send photos for a fixed quote.

How much does a soil test and footing design cost in Adelaide?

Our footing and slab designs start from $1,200 + GST ($1,320 inc GST), with the soil test and site classification arranged by us. The number of boreholes, access and the building affect the price, so you get a fixed quote first, in under 20 minutes on average, during business hours.

What is a site classification?

A rating of how much the ground surface can move as the soil wets and dries, using the AS 2870 classes A, S, M, H1, H2, E and P. The footing or slab is then designed for that class.

What site class is my suburb?

There's no official map of site classes by suburb, and soil can change within one street. Much of Adelaide sits on highly reactive clay; every site needs its own classification, which is why each lot is tested.

What is a Class P site?

A problem site, such as uncontrolled fill, soft ground, trees, a removed tree or abnormal moisture from a leaking pipe. The standard movement bands don't apply, so the footings are designed for the specific problem.

Do I need a soil test for an extension or granny flat?

Usually, if there are new footings or a slab. The Building Rules Consent application must include details of any foundation investigation, and the footing design depends on the class. See extensions and granny flats.

Can you design footings from an existing soil report?

Often, yes, if it covers the building area and suits the design. We review it as part of your quote and say if more testing is needed. Desktop design from an existing report is available anywhere in South Australia.

Why do Adelaide footings need to be so stiff?

Adelaide's reactive clays shrink in dry months and swell in wet ones. Adelaide University research in 2026 modelled moisture changes reaching about 3.8 m deep on one site, close to the 4 m recommended for Adelaide residential construction, so footings are sized to ride that movement.

Do trees affect my footing design?

Yes. Roots dry the clay, so trees near the building can make a site Class P or call for deeper footings. Regulated trees on your land or next door must also be shown on the building consent site plan.