Trees

Tree roots and house cracks: the SA rules

When a tree near your house is regulated or significant in South Australia, the 3 m exemption and its eucalypt exceptions, and what it takes to remove one because of cracking.

Large gum tree with exposed surface roots a few metres from the corner of a red-brick house, with a stair-step crack running down the brickwork below a window

In short

In South Australia a tree inside the Regulated and Significant Tree Overlay is regulated if its trunk is 1 m or more around, measured 1 m above ground, and significant at 2 m or more. Trees within 3 m of your house or in-ground pool are exempt, except eucalypts, Corymbia, Angophora and willow myrtle. Removing a protected tree because of cracking needs approval and evidence, such as an engineer's report.

Key takeaways

  • Regulated: trunk circumference 1 m or more. Significant: 2 m or more. Both measured 1 m above natural ground, and only inside the overlay.
  • The 3 m exemption never covers eucalypts, Corymbia, Angophora or willow myrtle (Agonis flexuosa).
  • Removal for cracking has to meet the overlay's test: extensive damage to a building of value, and no reasonable alternative.
  • Prove the cause first. Leaking pipes, poor drainage and seasonal clay movement crack houses too, with no tree involved.

Big trees and cracked walls go together in many Adelaide streets, and the question people ask is simple: can the tree go? In South Australia the answer depends on the tree's size, species and distance from the house, and, for protected trees, on evidence that the tree is really the cause and that nothing short of removal will do.

Trees and cracking: quick facts

Regulated tree
Trunk 1 m or more around, 1 m above ground
Significant tree
Trunk 2 m or more around
Exemption
Within 3 m of a house or in-ground pool
Never exempt by distance
Eucalypts, Corymbia, Angophora, willow myrtle
Rules in force
Since 16 May 2024
Our crack report
From $990 + GST ($1,089 inc GST)

What is a regulated or significant tree in South Australia?

A regulated tree has a trunk circumference of 1 m or more, and a significant tree 2 m or more, measured 1 m above natural ground. These controls apply only inside the Regulated and Significant Tree Overlay, so check your address on PlanSA first.

CategorySingle trunkMultiple trunksBefore 16 May 2024
Regulated1 m or moreTotal 1 m or more, average 310 mm or more2 m
Significant2 m or moreTotal 2 m or more, average 625 mm or more3 m

Circumference measured 1 m above natural ground level. PDI (General) Regulations 2017, reg 3F, in force from 16 May 2024.

The 2024 reform lowered both thresholds and cut the exemption distance from 10 m to 3 m, so many trees that were free to remove a few years ago are now regulated. Older advice still quotes the 2 m and 3 m figures and the 10 m distance.

Which trees near a house are exempt?

A tree within 3 m of an existing dwelling or in-ground pool on the same allotment is exempt, unless it is one of four kinds of tree. The distance is measured from the base of the trunk to the nearest part of the house or pool at natural ground level.

SituationControlled as regulated or significant?
Within 3 m of your house or in-ground poolExempt
Within 3 m, but a eucalypt, Corymbia, Angophora or willow myrtle (Agonis flexuosa)Still controlled
A species on the Minister's exempt listExempt
A dead treeExempt
Within 20 m of a dwelling in a Medium or High bushfire risk areaExempt
More than 3 m away and over the size threshold, inside the overlayControlled

PlanSA, Significant and regulated trees; PDI (General) Regulations 2017, Schedule 4 cl 18. Other overlays can apply, so check your address on PlanSA.

The species exception is easy to miss. A lemon-scented gum (Corymbia) 2 m from the wall is still a regulated tree if it meets the size test.

What work on a regulated tree needs approval?

Removing, killing, lopping, ringbarking or topping a regulated or significant tree needs development approval, and so does "substantial damage" to it, including to its root system. That last part catches root barrier trenches and excavation close to a protected tree.

  • Limited pruning is allowed under PlanSA's guidance: no more than 30% of the crown, once every 5 years, to remove dead wood or branches that pose a material risk. Check the conditions before you cut.
  • Offsets. An approved removal needs 2 replacement trees for a regulated tree or 3 for a significant tree, or a payment into the offset fund ($1,000 and $1,500 from May 2024, possibly indexed since).
  • Appeals. A refusal can be appealed to the Environment, Resources and Development Court within 2 months.

Is the tree really causing the cracks?

Sometimes, but not always, and that has to be shown before anyone removes a protected tree or pays for underpinning. Trees crack houses on reactive clay by drawing moisture out of the soil under the footings, so the ground shrinks and the footing drops on the tree side.

What moves a house? Four common causes

Common causes of house movement Cross-section of a single-storey house on strip footings. A tree on the left has roots reaching under the left footing. A band of reactive clay runs under the house with shrinkage cracks. On the right, a leaking pipe wets the soil, and an area of loose fill sits under the right footing. Numbered red markers point to each cause. 1 2 3 4 Firmer ground
  1. Trees and roots draw moisture from the soil near a footing, so clay under that side shrinks.
  2. Reactive clay swells when wet and shrinks when dry, moving footings with the seasons.
  3. Leaking pipes or poor drainage soak and soften the ground under part of the house.
  4. Poorly compacted fill keeps settling under a footing long after the house is built.
Figure 1Simplified section, not to scale. Most movement has more than one contributor, which is why the cause should be confirmed before anyone prices a repair.Illustrative diagram. Prepared by Adelaide Structures.

The same cracks can come from other causes. Much of Adelaide sits on highly reactive clay; every site needs its own classification. Clay also swells where leaking stormwater or sewer pipes wet it, and shrinks in dry years without any tree. Adelaide University research published in September 2026 found soil cracks 5 to 40 mm wide and up to 1 m deep on one Adelaide site, deepest in March and April.

SignPoints towards a treePoints elsewhere
LocationCracks on the side or corner nearest the treeCracks near a downpipe, a wet area or a leaking pipe
SeasonsCracks open in late summer and autumn, close in winterCracks that keep widening after wet weather
PatternThe corner or wall nearest the tree has droppedA section has lifted (heave) rather than dropped
GroundDry, shrunken soil with roots under the footingWet or soft soil, fill, or a broken drain

A guide only. The cause is confirmed with measured crack widths, floor levels, monitoring over time and, where needed, soil testing.

When can a regulated tree be removed because of cracking?

A regulated tree can be removed when it is causing, or is likely to cause, extensive damage to a building of value and there is no reasonable alternative. That is the test in the Regulated and Significant Tree Overlay, Performance Outcome 1.3.

  1. Is the building "of value"?

    The overlay names a Local or State Heritage Place, or "a substantial building of value". Whether a building qualifies is decided case by case, so the evidence should say why it does.

    Yes: keep goingNo: removal is hard to justify
  2. Is the damage extensive, and is the tree the cause?

    The application has to show the damage and link it to the tree, not just to clay or drainage.

    Yes: keep goingNo: fix the actual cause
  3. Is there no reasonable alternative?

    Repairs, drainage, a root barrier or footing works may solve the problem with the tree left in place.

    Yes, none work: removal can be supportedNo: the alternative is expected
  4. Is it a significant tree?

    Removal is avoided "unless all reasonable remedial treatments and measures have been determined to be ineffective".

    Yes: show those measures failNo: the regulated tree test applies

Performance Outcome 2.1 also protects the root zone of protected trees from excavation, fill and sealing, which affects extensions, driveways and new footings near them.

What must an engineer's report say to support tree removal?

An engineer's report supporting removal has to address the overlay's own words: the damage, the cause, the building's value and the alternatives. A report that only says "the tree is damaging the house" rarely carries an application.

  • The damage, measured. Crack locations, widths and patterns rated against the AS 2870 damage categories, with floor levels and photos.
  • The cause, with evidence. Why the tree is responsible, and why leaks, drainage, fill or general clay movement have been ruled out or rated as minor.
  • Extent and outlook. Whether the damage is extensive now, or likely to become so if the tree stays.
  • The building. Why the house is a substantial building of value, or a heritage place.
  • Alternatives. Root barriers, drainage, repairs and footing works considered, with reasons each is or isn't reasonable; for a significant tree, why they would be ineffective.
  • What happens next. Repairs or monitoring needed either way, so the cracks are dealt with after the decision.
  1. Cat 0Negligible< 0.1 mm
  2. Cat 1Very slight< 1 mm
  3. Cat 2Slight< 5 mm
  4. Cat 3Moderate5–15 mm
  5. Cat 4Severe15–25 mm
  6. Cat 5Very severe> 25 mm
Figure 2Damage categories for walls, with approximate crack widths. Crack width is a guide only: the number, pattern and location of cracks also matter.Source: AS 2870-2011 Residential slabs and footings, Appendix C, Table C1.

An arborist's report usually sits beside it, covering the tree's species, size, health and roots. We don't assess trees; we report on the building, and we are engineering only, with no repair or removal work to sell. See our cracks and footing movement report.

How do trees affect new footings and extensions?

Where the Code's Urban Tree Canopy Overlay applies, new homes have to include trees, and those trees sit close to new footings. The overlay asks for 1 small tree per dwelling on sites under 450 m², 1 medium or 2 small on 450–800 m², and 1 large, 2 medium or 4 small over 800 m², with an offset payment as an alternative in some zones.

On reactive clay, a footing designer allows for existing trees, planned trees and trees on the neighbour's side. A building consent site plan must also show any regulated tree on your land or on adjoining land. See site classification and footings. We assess tree-related cracking across Greater Adelaide, including Burnside and Blackwood.

When should you call a structural engineer about a tree?

  • Cracks 5 mm or wider, or stepped cracks, on the side of the house nearest a large tree
  • Doors and windows stick in late summer and free up in winter
  • You want to remove a regulated or significant tree and need evidence for the application
  • The tree is the neighbour's and you need the cause documented before you talk to them
  • A contractor has quoted underpinning and blamed the tree. Get an independent second opinion first, from $350 + GST ($385 inc GST)

What to send

Photos of the cracks (close up and from further back), the tree and its distance from the wall, and any arborist report. Get a fixed quote in under 20 minutes on average, during business hours.

Sources

  1. PlanSA, Significant and regulated trees. Thresholds, the overlay, exemptions and what counts as tree-damaging activity
  2. Planning, Development and Infrastructure (General) Regulations 2017. Reg 3F (regulated and significant trees), Schedule 4 cl 18, Schedule 8 (site plans)
  3. PlanSA, Planning and Design Code, Version 2026.19 (8 October 2026). Regulated and Significant Tree Overlay PO 1.3 and PO 2.1; Urban Tree Canopy Overlay DTS/DPF 1.1
  4. Department for Infrastructure and Transport, Tree reform information brochure. The rules before and after 16 May 2024
  5. Department for Housing and Urban Development, New rules to protect Adelaide's tree canopy. Offset fees from May 2024
  6. Adelaide University, Stronger home foundations needed to withstand climate change (9 September 2026)

FAQ

Trees and cracking in SA: FAQs

Still unsure? Call 08 7083 9853 or send photos for a fixed quote.

What makes a tree regulated in SA?

A tree inside the Regulated and Significant Tree Overlay is regulated if its trunk circumference is 1 m or more, measured 1 m above natural ground, or if several trunks total 1 m or more with an average of 310 mm or more. At 2 m or more (several trunks totalling 2 m, averaging 625 mm or more) it is significant.

Can I remove a tree within 3 m of my house in SA?

Generally yes: a tree within 3 m of an existing house or in-ground pool on the same block is exempt from the regulated tree controls. The exception is eucalypts, Corymbia, Angophora and willow myrtle (Agonis flexuosa), which stay protected however close they are. Measure from the base of the trunk to the nearest part of the house at natural ground level.

Can a regulated tree be removed if it's cracking my house?

Possibly, with approval. The overlay accepts tree-damaging activity to rectify or prevent extensive damage to a building of value where there is no reasonable alternative, and for a significant tree only once reasonable remedial measures have been shown to be ineffective. You need evidence, usually an engineer's report and an arborist's report.

Do I need an arborist or a structural engineer?

Often both. An arborist reports on the tree: species, size, health and roots. A structural engineer reports on the house: the damage, its cause and whether a repair or other measure would work without removing the tree.

Can I cut the roots of a regulated tree for a root barrier?

Be careful. Substantial damage to a regulated tree, including to its root system, is controlled like removal, so check with your council or an arborist before trenching near a protected tree.

What does it cost to remove a regulated tree in SA?

An approved removal needs replacement trees (2 for a regulated tree, 3 for a significant tree) or a payment into the offset fund. The fees rose to $1,000 for a regulated tree and $1,500 for a significant tree in May 2024 and may have been indexed since, so check the current figure with your council.

How much does an engineer's crack report cost?

Our cracks and footing movement report starts from $990 + GST ($1,089 inc GST). It covers the cause of the cracking, including the part any tree plays, and you get a fixed quote first.